Mitsubishi Electric MELSEC Q Series User Manual page 169

Programmabale web server module

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

4 SET-UP AND PROCEDURE BEFORE OPERATION

Confirm password

Access authority

Initial screen

Back / Cancel

Select account setting

No. and click on Load

(2) Edit screen

[Setting screen]

[Setting item]

Sets the user name. (1 to 20 characters)

Sets the password. (8 to 14 characters)

Enters the password again.

Selects device write/tag component write/administrator authority.

Sets the initial screen address for access to the Web server module.

Saves the settings.

The settings are updated when the "Update" button on the Setting update screen is clicked, the

programmable controller is powered off and then on, or the CPU module is reset.

Discards the changed setting and return to the Account setting screen.

Loads the parameters of the No. selected in account setting No. and displays them on the Edit

Set the user name. (1 to 20 characters)

There is case sensitivity.

Refer to Appendix 4 (2) for the characters applicable to the user name.

Set the password. (8 to 14 characters)

There is case sensitivity.

Refer to Appendix 4 (2) for the characters applicable to the password.

Confirm password

Enter the password again.

Access authority (Device write/Tag component write/Administrator)

Set the device write/tag component write/administrator authority.

Melsec qj71ws96