Mitsubishi Electric MELSEC Q Series User Manual page 221

Programmabale web server module

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

5 CONNECTING WEB SERVER MODULE TO NETWORK

Network type setting

IP address setting

Automatic network connection setting at start-up

(2) Program example

This section explains programs for connection/disconnection using sequence

Program execution environment

Mount the Web server module on Slot "0" of the main base.

Connect the Web server module and the personal computer with a

crossing cable.

Web server module

Subnet mask : 255.255.255.0

Make the following network setting of the personal computer.

Make the following Web server module setting with the Web browser.

(Use the default values for other than the following.)

 System setting (Refer to Section 4.6.3)

After writing the sequence program using GX Developer, power the

programmable controller off and then on or reset the CPU module.

Crossing cable

: 192.168.3.3

Subnet mask : 255.255.255.0

: 192. 168. 3. 1

: 255. 255. 255. 0

Select "Connecting through LAN or the router.".

Select "Use the following IP address.".

 IP address

: 192. 168. 3. 3

 Subnet mask

: 255. 255. 255. 0

Select "No connection to network at start-up.".

Personal computer

: 192.168.3.1

Melsec qj71ws96