Common Operations For The Standard Screen - Mitsubishi Electric MELSEC Q Series User Manual
Programmabale web server module
Hide thumbs
Also See for MELSEC Q Series:
- User manual (834 pages) ,
- Reference manual (674 pages) ,
- Programming manual (624 pages)
Table of Contents
Advertisement
4 SET-UP AND PROCEDURE BEFORE OPERATION
4.6.2 Common operations for the standard screen
4 - 30
This section explains the common operations for the standard screen.
Refer to the corresponding sections for the monitor and set screens.
(1) Standard screen displaying procedure
(a)
Start the Web browser from the personal computer and enter the Web
server module's address. Refer to Section 4.6.3 for the IP address setting.
( 1)
(b)
As the user authentication screen ("Enter Network password" screen)
appears when accessing the Web server module, enter the account. Refer
to Section 4.6.5 for the account setting. ( 2)
(c)
The top page of the standard screen is displayed on the Web browser. ( 3)
1
Prior to shipment, the IP address of the Web server module is set as
indicated below.
IP address: 192.168.3.3
Subnet mask: 255.255.255.0
2
Prior to shipment, the account of the Web server module is set as indicated
below.
User name: QJ71WS96 (All in uppercase)
Password: MITSUBISHI (All in uppercase)
Access authority: Device write/Tag component write/Administrator
Initial screen: Standard screen top page (Top page (/index.htm))
3
The top page displayed when the address of the Web server module is
specified can be changed on the account setting screen. (Refer to Section
4.6.5)
IP address or host name of the web server module
MELSEC-Q
4 - 30
Advertisement
Table of Contents
