Setting Procedure For Event Monitor Function - Mitsubishi Electric MELSEC Q Series User Manual
Programmabale web server module
Hide thumbs
Also See for MELSEC Q Series:
- User manual (834 pages) ,
- Reference manual (674 pages) ,
- Programming manual (624 pages)
Table of Contents
Advertisement
6 FUNCTIONS
6.5.2 Setting procedure for event monitor function
6 - 57
(2) When the number of event historical data exceeds the limit
In each event history file, the following operation is performed when the number
of event historical data set in "Common setting" of the event setting exceeds the
limit.
(a)
Half of the event historical data are deleted, starting from the oldest data.
(b)
The latest data are saved into the line after the remaining data.
(Example) When the number of CPU event historical data has been
The setting procedure for using the event monitor function is indicated below.
Start
Create a network environment for Web server module
to access the Web server module from a personal
computer.
Make access target CPU setting on the Access
target CPU setting.
When monitoring tags or sending tag data by e-mail,
make tag setting on the Tag setting.
When sending logging data by e-mail, make the
setting on the Logging setting.
When sending an e-mail upon event occurrence,
make the setting on the E-mail setting.
Make event setting on the Event setting.
Completed
set to 10
MELSEC-Q
Five lines of event historical data
from the oldest are deleted, and
the latest data is stored in the
sixth line.
Refer to
Section 4. 6.
Refer to
Section 4. 6. 7.
Refer to
Section 6. 3. 3.
Refer to
Section 6. 4. 4.
Refer to
Section 6. 6. 3.
Refer to
Section 6. 5. 3.
6 - 57
Advertisement
Table of Contents
