Mitsubishi Electric MELSEC Q Series User Manual page 296

Programmabale web server module

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

6.6.2 Setting procedure for e-mail function

The following is the setting procedure for use of the e-mail function.

(1) Common procedure

The common procedure for this function is shown below.

Create a network environment for Web server module

to access the Web server module from a personal

For use of DNS server, make the DNS setting on

the System setting.

Make the required setting for sending e-mail on

the E-mail setting.

(2) Procedure for sending e-mail by programmable controller CPU

Collect the tag data or logging data to be attached to

e-mail and sent.

Create a sequence program (WMSEND instruction).

(3) Procedure for sending e-mail by event monitor function

Collect the tag data or logging data to be attached to

e-mail and sent.

Make the setting on the Event setting so that an

e-mail will be sent upon event occurrence.

Section 4. 6.

Section 4. 6. 3.

Section 6. 6. 3.

For tag function, refer to

Section 6. 3.

For logging function, refer

to Section 6. 4.

Refer to Section 8. 2.

For tag function, refer to

Section 6. 3.

For logging function, refer to

Section 6. 4.

For event function, refer to

Section 6. 5.

Melsec qj71ws96