System Configuration; Adjusting The Display Monitor; Irection Fk091075, Revision Ivid 3N Pro Xpert Ervice Anual; Hospital Info Tab - GE Vivid 3N Pro Series Service Manual

Table of Contents

System Configuration

Once all the required peripherals have been installed and the unit has been switched on, configure the

system settings in the System Configuration window tabs. Refer to the Vivid 3N Pro/Expert User Manual

for additional information about system configuration.

The display monitor's contrast and brightness controls may need periodic adjustment due to changes

in ambient light. They can be adjusted using the Contrast and Brightness buttons on the front part of

the display monitor. All display monitor controls, other than the contrast and brightness controls, are

factory adjusted for optimum settings and usually do not require further adjustment.

For details on adjusting the display monitor settings, refer to

1) Press Config on the alphanumeric keyboard. The System Configuration window is displayed with

the Hospital Info tab selected, as shown below:

2) In the Hospital Info tab, enter the required information in the appropriate fields.

3) Trackball to the OK button and press Select.

Figure 3-20 Hospital Info Tab

Section 3-8 - System Configuration

Section 6-6 "Monitor Operation" on page