Installing A Din Rail - Cisco Catalyst IR1800 Series Installation Manual
Rugged router hardware
Hide thumbs
Also See for Catalyst IR1800 Series:
- Hardware installation manual (112 pages) ,
- Installation manual (92 pages) ,
- Connecting (4 pages)
Table of Contents
Advertisement
Installing the Router
Step 2
Use four #10 screws when mounting the unit to the neighboring surface. The screws must be long enough to
penetrate at least 1.0 inch (25.4 mm) into the supporting wood or metal wall stud. See the following figure for
guidance.
Figure 7: Mounting Holes
Step 3
Route the cables so that they do not put a strain on the connectors or mounting hardware.
Note
Installing a DIN Rail
The DIN rail kit must be ordered separately. The Cisco part number is IR1800-DINRAIL.
Note
The DIN rail brackets come assembled in horizontal orientation. If your installation requires vertical orientation,
disassemble the components and reassemble them.
If you are mounting the device into a hollow wall, ensure that the wall material can support the
router's weight. Use appropriate wall anchor mounts.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Installing a DIN Rail
29
- Quick Links:
- Cisco Ir1821 Router
- Cisco Ir1835 Router
Hide quick links:
Advertisement
Table of Contents
