Table of Contents
Advertisement
Chapter 5
Max Capability
Indicates that the port speeds and
•
duplex mode settings can be accepted.
10 Half
Indicates that the port is advertising a 10Mbps
•
half duplex mode setting.
10 Full
Indicates that the port is advertising a 10Mbps
•
full duplex mode setting.
100 Half
Indicates that the port is advertising a
•
100Mbps half duplex mode setting.
100 Full
Indicates that the port is advertising a
•
100Mbps full duplex mode setting.
1000
Indicates that the port is advertising a 1000Mbps
•
full duplex mode setting.
Current
Advertisement
capabilities to its neighbor port to begin the negotiation
process. This field displays the current advertisement
settings.
Neighbor Advertisement
to which the selected interface is connected) advertises
its capabilities to the port to start the negotiation process.
This field displays the neighbor's current settings.
Back Pressure
The Back Pressure feature of the selected
port can be enabled or disabled.
Current Back Pressure
Displays whether Back Pressure is
enabled or disabled on the currently selected port.
Flow Control
The Flow Control feature of the selected
port can be enabled or disabled.
Current Flow Control
Displays whether Flow Control is
enabled or disabled on the currently selected port.
MDI/MDIX
Select the Auto setting if you want the port
to automatically detect the cable type. Select MDI if the
port is connected to an end station. Select MDIX if the
port is connected to a hub or another switch.
Current MDI/MDIX
This is the current MDI/MDIX status
of the port.
PVE
When a port is a Private VLAN Edge (PVE) port,
it bypasses the Forwarding Database and forwards all
unicast, multicast, and broadcast traffic to an uplink.
NOTE:
PVE does not apply to the SRW208.
Click the Save Settings button to save your changes.
8-Port 10/100 Ethernet Switch with Webview
The
port
advertises
its
The neighbor port (the port
Advanced Configuration
Port Management > Link Aggregation
Port Management > Link Aggregation
LAG
This indicates if the port is part of a LAG.
Description
Description for this LAG.
Admin Status
The admin status of the LAG. Up indicates
that the LAG is available. Down indicates that administrator
has taken the port offline. When modifying the option, be
sure to click the Save Settings option.
Type
The type of LAG is displayed here.
Link Status
The link status is displayed here.
Speed
The connection speed is displayed here.
Duplex
The connection duplex is displayed here.
Flow Control
This is the flow control status of the LAG. It
is active when the port uses Full Duplex Mode.
LAG Mode
Displays the LAG status, On, Off, or Not
Present.
Detail button
The Detail button opens up the Link
Aggregation Detail screen.
Link Aggregation Detail
LAG Configuration
LAG
The number of the selected LAG.
Description
A general description can be listed here for
reference.
LACP
Indicates if the LAG is in LACP (Link Aggregation
Control Protocol) mode.
LAG Type
The port types that comprise the LAG.
Administrative Status
Enables or disables traffic
forwarding through the selected LAG.
22
Hide quick links:
Advertisement
Table of Contents
