Advanced Functions; Getting Surround Sound From Stereo Speakers; Adjusting The Dynamic Range Of The Audio Soundtrack - Pioneer DV-636D Operating Instructions Manual
Hide thumbs
Also See for DV-636D:
- Operating instructions manual (128 pages) ,
- Service manual (91 pages)
Table of Contents
Advertisement
Advanced
Functions
This player is compatible with DVD, Video CD, and CD
disc formats. Users already familiar with Video CD or CD
will already be familiar with some of the functions the
player is capable of performing. With DVD, an even
greater number of possibilities and functions are
available.
Note
DVDs differ in content and do not all contain the same
information. Therefore some functions in this section may
not work or have no effect on some DVDs.
Getting Surround Sound from
Stereo Speakers
Depending on the audio source, this player is capable of
switching between Virtual Dolby Digital (multichannel
audio sources) and TruSurround (stereo audio sources) to
produce a surround sound effect from stereo speakers.
This function works only when connections are
made to the AUDIO OUT (2 CH) jacks.
Audio1
Audio2
Video
Virtual Surround
Audio DRC -
Audio Out – 2 Channel
Speaker Setting
Surround effect from 2 speakers
Move
Settings: Off*
2V/TruSurround
Notes
• There is no effect when the audio source is either DTS or
96 kHz LPCM or during CD playback.
• When the "VIRTUAL DOLBY DIGITAL" indicator is lit
during playback, and [Dolby Digital 3 PCM] is selected in
the [Dolby Digital Out] setting in the Setup screen Audio
1 menu, there is no audio output from the digital output
jacks.
• The Virtual Surround mode can also be turned on and off by
pressing VIRTUAL DOLBY DIGITAL on the front panel.
However, this button does not work when the "GUI" indicator
is lit.
– DVD/Video CD
Language
General
Off
2V/TruSurround
SETUP
Exit
*Factory setting
TruSurround and Virtual Dolby Digital
TruSurround uses technology that simulates
multichannel surround sound using only two speakers.
Virtual Dolby Digital works in conjunction with Dolby
Digital audio sources to create a realistic surround
sound. Virtual Dolby Digital is selected automatically
when Dolby Digital sources are loaded.
Adjusting the Dynamic Range
of the Audio Soundtrack
Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. Select from three levels of
compression depending on how much effect you want.
When Audio DRC is set to [Off], there is no effect on
the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 2 menu.
Audio1
Audio2
Video
Language
Virtual Surround -
Audio DRC
Audio Out - 2 Channel
Speaker Setting
Dynamic playback at low volume
Move
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
Note
Audio DRC is only effective with Dolby Digital audio sources.
– DVD
General
High
Medium
Low
Off
SETUP
Exit
*
Factory setting
41
Advertisement
Table of Contents
