Example: Configuring Dhcp Auto-Image Update; Example: Configuring A Device To Download Configurations From A Dhcp Server; Example: Scheduling Software Image Reload - Cisco Catalyst 9500 Manual
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Performing Device Setup Configuration
Example: Configuring DHCP Auto-Image Update
Device# configure terminal
Device(config)# ip dhcp pool pool1
Device(dhcp-config)# network 10.10.10.0 255.255.255.0
Device(dhcp-config)# boot config-boot.text
Device(dhcp-config)# default-router 10.10.10.1
Device(dhcp-config)# option 150 10.10.10.1
Device(dhcp-config)# option 125 hex 0000.0009.0a05.08661.7574.6f69.6e73.7461.6c6c.5f64.686370
Device(dhcp-config)# exit
Device(config)# tftp-server flash:config-boot.text
Device(config)# tftp-server flash:image_name
Device(config)# tftp-server flash:boot-config.text
Device(config)# tftp-server flash: autoinstall_dhcp
Device(config)# interface gigabitethernet1/0/4
Device(config-if)# no switchport
Device(config-if)# ip address 10.10.10.1 255.255.255.0
Device(config-if)# end
Example: Configuring a Device to Download Configurations from a DHCP
Server
The following example shows how to use a Layer 3 SVI interface on VLAN 99 to enable DHCP-based
autoconfiguration with a saved configuration:
Device# configure terminal
Device(config)# boot host dhcp
Device(config)# boot host retry timeout 300
Device(config)# banner config-save ^C Caution - Saving Configuration File to NVRAM May Cause
You to No longer Automatically Download Configuration Files at Reboot^C
Device(config)# vlan 99
Device(config-vlan)# interface vlan 99
Device(config-if)# no shutdown
Device(config-if)# end
Device# show boot
BOOT path-list:
Config file:
Private Config file:
Enable Break:
Manual Boot:
HELPER path-list:
NVRAM/Config file
Timeout for Config
Config Download
Device#
Example: Scheduling Software Image Reload
This example shows how to reload the software on a device on the current day at 7:30 p.m:
flash:/config.text
flash:/private-config.text
no
no
buffer size:
32768
Download:
300 seconds
via DHCP:
enabled (next boot: enabled)
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Example: Configuring DHCP Auto-Image Update
93
Hide quick links:
Advertisement
Table of Contents
