Examples; What To Do Next; Maintaining Configuration Files Larger Than Nvram - Cisco Catalyst 9500 Manual
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Examples
Command or Action
• copy ftp: [[[
//[username[:password]@]location]/directory]/filename]nvram:startup-config
Example:
Device# copy ftp:nvram:startup-config
Examples
Copy FTP Running-Config
The following example copies a host configuration file named host1-confg from the netadmin1 directory on
the remote server with an IP address of 172.16.101.101, and loads and runs the commands on the device:
device# copy ftp://netadmin1:mypass@172.16.101.101/host1-confg system:running-config
Configure using host1-confg from 172.16.101.101? [confirm]
Connected to 172.16.101.101
Loading 1112 byte file host1-confg:![OK]
device#
%SYS-5-CONFIG: Configured from host1-config by ftp from 172.16.101.101
Copy FTP Startup-Config
The following example specifies a remote username of netadmin1. Then it copies the configuration file named
host2-confg from the netadmin1 directory on the remote server with an IP address of 172.16.101.101 to the
startup configuration:
device# configure terminal
device(config)# ip ftp username netadmin1
device(config)# ip ftp password mypass
device(config)# end
device# copy ftp: nvram:startup-config
Address of remote host [255.255.255.255]? 172.16.101.101
Name of configuration file[host1-confg]? host2-confg
Configure using host2-confg from 172.16.101.101?[confirm]
Connected to 172.16.101.101
Loading 1112 byte file host2-confg:![OK]
[OK]
device#
%SYS-5-CONFIG_NV:Non-volatile store configured from host2-config by ftp from 172.16.101.101
What to Do Next
After you have issued the copy EXEC command, you may be prompted for additional information or for
confirmation of the action. The prompt displayed depends on how much information you provide in the copy
command and the current setting of the file prompt global configuration command.
Maintaining Configuration Files Larger than NVRAM
To maintain a configuration file that exceeds the size of NVRAM, perform the tasks described in the following
sections:
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
198
Purpose
Managing Configuration Files
Hide quick links:
Advertisement
Table of Contents
