Compressing The Configuration File - Cisco Catalyst 9500 Manual
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Managing Configuration Files
Compressing the Configuration File
To compress configuration files, complete the tasks in this section:
SUMMARY STEPS
1. enable
2. configure terminal
3. service compress-config
4. end
5. Do one of the following:
6. copy system:running-config nvram:startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
service compress-config
Example:
Device(config)# service compress-config
Step 4
end
Example:
Device(config)# end
Step 5
Do one of the following:
• Use FTP, RCP, or TFTP to copy the new
configuration.
• configure terminal
Example:
Device# configure terminal
• Use FTP, RCP, or TFTP to copy the new configuration.
• configure terminal
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Compressing the Configuration File
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Specifies that the configuration file be compressed.
Exits global configuration mode.
Enters the new configuration:
• If you try to load a configuration that is more than
three times larger than the NVRAM size, the following
error message is displayed:
"[buffer overflow - file-size /buffer-size bytes]."
199
Hide quick links:
Advertisement
Table of Contents
