Configuring The Time Zone - Cisco Catalyst 9500 Manual
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Administering the Device
Follow these steps to set the system clock:
SUMMARY STEPS
1. enable
2. Use one of the following:
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
Use one of the following:
• clock set hh:mm:ss day month year
• clock set hh:mm:ss month day year
Example:
Device# clock set 13:32:00 23 March 2013
Configuring the Time Zone
Follow these steps to manually configure the time zone:
SUMMARY STEPS
1. enable
2. configure terminal
3. clock timezone zone hours-offset [minutes-offset]
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
• clock set hh:mm:ss day month year
• clock set hh:mm:ss month day year
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Manually set the system clock using one of these formats:
• hh:mm:ss Specifies the time in hours (24-hour
format), minutes, and seconds. The time specified is
relative to the configured time zone.
• day Specifies the day by date in the month.
• month Specifies the month by name.
• year Specifies the year (no abbreviation).
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Configuring the Time Zone
11
Hide quick links:
Advertisement
Table of Contents
