Canon PRO-10 Series Manual page 520

Hide thumbs Also See for PRO-10 Series:

Table of Contents

Overview of the Printer

> Changing the WPA or WPA2 Detailed Settings

Changing the WPA or WPA2 Detailed Settings

To change the wireless network settings of the printer, connect the printer and the computer with a USB

cable temporarily. If you modify the wireless network settings of the computer over wireless connection

without USB connection, your computer may not be able to communicate with the printer after modifying

the settings.

The example screenshots in this section refer to the WPA detailed settings.

Start up IJ Network Tool.

Starting up IJ Network Tool

Select the printer in Printers:.

When the printer is connected to the computer with a USB cable temporarily, select the printer with

USB appearing in the Connected to column.

Click the Configuration button.

Click the Wireless LAN button.

Select Use WPA or Use WPA2 in Encryption Method: and click Configuration.

Enter the passphrase, confirm the type of dynamic encryption and click OK.

1. Passphrase:

Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63

alphanumeric characters or a 64-digit hexadecimal value.

If you do not know the access point passphrase, refer to the instruction manual provided with the

access point or contact its manufacturer.

2. Dynamic Encryption Type:

Select the dynamic encryption method from either TKIP (Basic Encryption), or AES (Secure

Encryption).

If the printer cannot communicate with the computer after the encryption type of the printer was

switched, make sure that encryption types for the computer and the access point matches that

set to the printer.

How to Set a WEP/WPA/WPA2 Key

This printer supports WPA-PSK (WPA-Personal) and WPA2-PSK (WPA2-Personal).

About Network Communication

Changing and Confirming Network

Show Quick Links

Table of Contents