Table of Contents
Advertisement
Introduction to the Passive Optical Network
5
1
2
Rear Panel
The section describes the rear-panel components of a Cisco Catalyst PON Series ONT.
Figure 6: Rear Panel of CGP-ONT-4PVC
1
2
Ports
1 G 10/100/1000 PoE Ports
The Ethernet ports use RJ-45 connector cables with Ethernet pinouts. The 10BASE-T, 100BASE-TX, and
1000BASE-T traffic requires Category 5 or Category 5e twisted pair (UTP) cable. The 10BASE-T traffic can
use Category 3 or Category 4 UTP cable.
The ports also provide PoE support for devices that are compliant with IEEE 802.3af and IEEE 802.3at.
FXS Ports
The FXS ports use RJ-11 telephone cables.
PON Port
The PON ports use multi-source agreement (MSA) type UPC or SC-PC fiber connector cables. The PON
ports range is from 8 to -29 dBm.
USB Port
A USB type A console port is provided for log and configuration file management.
1 G LED
Not available on all ONT models
Not available on all ONT models
AC power connector
Grounding connector
10
PON port
3
Lock slot
-
-
Cisco Catalyst PON Series Switches Hardware Installation Guide
Rear Panel
9
Advertisement
Table of Contents
Troubleshooting
