Table of Contents
Advertisement
Installing an OLT
Installing an OLT
The following sections provide information about the various tasks that comprise the Cisco Catalyst PON
Series OLT installation.
Mounting the OLT on a Table or Shelf
Procedure
Step 1
Locate the adhesive strip with the rubber feet in the mounting-kit envelope.
Step 2
Attach the four rubber feet to the four circular etches on the bottom of the OLT.
Step 3
Place the OLT on a table or shelf near an AC power source.
Attaching the Rack-Mounting Bracket and Mounting a OLT on a Rack
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Statement 1006
Before you begin
You should have the 19-inch rack-mounting bracket that is included with the shipping box.
Procedure
Step 1
Use the Phillips head screwdriver and attach the 19-inch rack-mounting bracket to an OLT using the
mounting-bracket screws. Follow the same steps to attach the second bracket to the other side.
Cisco Catalyst PON Series Switches Hardware Installation Guide
18
heaviest component at the bottom of the rack.
unit in the rack.
Installation
Advertisement
Table of Contents
Troubleshooting
