Table of Contents
Advertisement
Menu items in the 600s, relating to the time code generator (Continued)
Item number Item name
608
PHASE CORRECTION
609
TCG CF FLAG
610
REGEN CONTROL
MODE
SDTI-CP OUTPUT LTC
616
OVERRIDE (only when
the BKNW-124 is
installed)
Settings
Select whether or not to carry out phase correction control on the LTC generated
by the time code generator.
OFF : No control.
ON: Carry out control.
Select whether or not the color framing flag is set in the blank bit of the time code
data.
OFF : Color framing flag is not set.
ON: Color framing flag is set.
AUTO: Color framing flag is set or not depending upon the color framing phase
relationship between the recorded video signal and the time code signal.
When AUTO is selected, color framing is controlled as follows according to the
operating mode of the time code generator.
• In INT PRESET mode (the INT/EXT switch is set to INT, the PRESET/REGEN
switch is set to PRESET, and in modes other than the automatic editing mode):
the time code signal is generated with color framing locked to the video signal,
and the color framing flag is set.
• In INT REGEN mode (the INT/EXT switch is set to INT, the PRESET/REGEN
switch is set to REGEN, and in the automatic editing mode), and also in EXT
mode (the INT/EXT switch is set to EXT): the time code signal is generated with
color framing locked to the video signal, and the color framing flag is not set.
In editing performed using the control panel of this unit, select whether or not the
time code is automatically regenerated.
AS&IN : In automatic editing with this unit as the recorder, regardless of the
setting of the PRESET/REGEN switch, in assemble and insert editing, the time
code generator regenerates according to the time code on the tape.
ASSEM: In automatic editing with this unit as the recorder, regardless of the
setting of the PRESET/REGEN switch, in assemble editing only, the time code
generator regenerates according to the time code on the tape.
MANU: Regardless of whether this unit is the recorder or player, the time code
generator operates in accordance with the setting of the INT/EXT switch.
FULL: Regardless of whether local or remote, when any of the ASSEMBLE,
VIDEO, and AUDIO CH1 to CH4 buttons is lit, the time code generator
regenerates on the time code played back from the tape.
Note
Only time code signal (LTC/VITC) is regenerated using this menu item.
Regeneration of the user bit signal (LUB/VIUB) is determined by the setting of the
PRESET/REGEN switch in the time code setting section, not the setting of menu
item 605.
Specify whether or not the LTC signal is inserted into the time code (MPEG2
video elementary stream editing information time code) in the MPEG stream
within the SDTI-CP output signal.
DIS : The LTC signal is not inserted.
ENA: The LTC signal is inserted.
7-17
Chapter 7 Menu System
Advertisement
Table of Contents
