Table of Contents
Advertisement
Install and Remove QSFP Transceiver Modules
Install and Remove QSFP Transceiver Modules
This section provides the installation, cabling, and removal instructions for the Quad Small Form-Factor
Pluggable transceiver modules. Refer to the
on optical transceivers.
The following figure shows a 400-Gigabit QSFP-DD optical transceiver.
Figure 14: 400-Gigabit QSFP-DD Transceiver Module
1
3
Warning
Statement number 1092Hot surface for Field Replaceable Units
Hot surface. Use care when handling.
Installing the Transceiver Module
Warning
Statement number 1092Hot surface for Field Replaceable Units
Hot surface. Use care when handling.
Caution
The transceiver module is a static-sensitive device. Always use an ESD wrist strap or similar individual
grounding device when handling transceiver modules or coming into contact with system modules.
Hardware Installation Guide for Cisco 8100 Series Routers
28
Cisco Optical Transceiver Handling Guide
Pull-tab
2
Electrical connection to
the module circuitry
Connect Router to the Network
for additional details
QSFP-DD transceiver
body
Advertisement
Table of Contents
