Table of Contents
Advertisement
DIGITAL VIDEO CAMERA
GR-DVL915
GR-DVL815
GR-DVL510
GR-DVL310
Please visit our Homepage on the World Wide Web and
answer our Consumer Survey (in English only):
http://www.jvc-victor.co.jp/english/index-e.html
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No. which is located on the
bottom of cabinet. Retain this information for future reference.
Model No.
Serial No.
The camcorder illustrations
appearing in this instruction
manual are of the GR-DVL915.
CONTENTS
AUTOMATIC
DEMONSTRATION
GETTING STARTED
VIDEO RECORDING &
PLAYBACK
VIDEO RECORDING ............ 16 – 20
VIDEO PLAYBACK .............. 21 – 24
DIGITAL STILL CAMERA (D.S.C.)
RECORDING &
PLAYBACK
D.S.C. RECORDING ............ 26 – 27
D.S.C. PLAYBACK .............. 28 – 36
ADVANCED
FEATURES
FOR RECORDING ................ 38 – 45
USING THE MENU FOR
DETAILED ADJUSTMENT ...... 46 – 51
DUBBING ......................... 52 – 55
USING THE REMOTE
CONTROL UNIT ................ 56 – 67
SYSTEM CONNECTIONS ........ 68 – 69
REFERENCES
DETAILS ................................... 71
TROUBLESHOOTING ............ 72 – 76
USER MAINTENANCE ................... 77
INDEX ............................. 78 – 84
CAUTIONS ........................ 85 – 87
TERMS ............................ 88 – 89
SPECIFICATIONS ................. 90 – 91
The D.S.C. (Digital Still Camera) features
are available on GR-DVL915, GR-DVL815
and GR-DVL510.
LYT0722-001A
ENGLISH
6
7 – 14
15 – 24
25 – 36
37 – 68
70 – 91
EN
Advertisement
Chapters
Table of Contents
Related Manuals for JVC GR-DVL915
Summary of Contents for JVC GR-DVL915
- Page 1 USER MAINTENANCE ....77 INDEX ......78 – 84 The camcorder illustrations appearing in this instruction CAUTIONS ......85 – 87 manual are of the GR-DVL915. TERMS ......88 – 89 SPECIFICATIONS ....90 – 91 INSTRUCTIONS The D.S.C. (Digital Still Camera) features...
- Page 2 However, live recording and LCD monitor/viewfinder playback are possible anywhere. ● Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion...
- Page 3 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes.
- Page 4 ..remember that this camcorder is intended for private consumer use only. Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.) *Memory cards can be used with GR-DVL915/DVL815/DVL510 only.
- Page 5 •Shoulder Strap •Lens Cap ( pg. 6 for BN-V408U attachment) •Memory Card •AAA (R03) Battery x 2 •CD-ROM 16 MB (GR-DVL915/ (for remote control unit) DVL815 only) or 8 MB (GR-DVL510 only) (Already inserted in the camcorder) •Audio/Video Cable •Editing Cable (ø3.5 mini-plug to RCA plug)
- Page 6 MODE” and press it. The Sub Menu appears. 4. Rotate the MENU/BRIGHT wheel to select “OFF” and press it. 5. Rotate the MENU/BRIGHT wheel to select “1RETURN”, GR-DVL915/DVL815/DVL510 and press it twice. The normal screen appears. only NOTE: If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.
-
Page 7: Table Of Contents
Viewfinder Adjustment ........10 Shoulder Strap Attachment ......10 Tripod Mounting .......... 10 Date/Time Settings........11 Loading/Unloading A Cassette ......12 Recording Mode Setting ......... 13 Loading A Memory Card ......14 (GR-DVL915/DVL815/DVL510 only) Picture Quality Mode Setting ......14 (GR-DVL915/DVL815/DVL510 only) -
Page 8: Power
GETTING STARTED (cont.) Power BAT. RELEASE Switch This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK Tilt the viewfinder upward . - Page 9 AA-V15U AC Power Adapter/Charger for BN-V840U battery pack and only AA-V80U AC Power Adapter/Charger for BN-V856U battery pack. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder.
-
Page 10: Grip Adjustment
GETTING STARTED (cont.) Grip Adjustment Power Zoom Lever Separate the Velcro strip. Pass your right hand through the loop and grasp Recording Start/ Stop button the grip. Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. -
Page 11: Date/Time Settings
CAMER MANUA “1RETURN”, and press it twice. The Menu Screen SYSTE closes. D I SPL GR-DVL915/ NOTE: DVL815/DVL510 Even if you select “CLOCK ADJ.”, if the parameter is not only highlighted the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/ DISPLAY Menu time parameter (month), the clock stops. -
Page 12: Loading/Unloading A Cassette
GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. Make sure the Slide and hold OPEN/EJECT in the direction of the window side is arrow then pull the cassette holder cover open until it facing out. -
Page 13: Recording Mode Setting
•“LP” (Long Play) is more economical, providing 1.5 times the recording time. NOTES: ● If the recording mode is switched during recording, the GR-DVL915/DVL815/ playback picture will be blurred at the switching point. DVL510 only ● It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder. -
Page 14: Loading A Memory Card
36. 32 MB (optional) 64 MB (optional) 1600 ATTENTION: * Provided with GR-DVL915/DVL815 only. Do not insert/remove the memory card while the ** Provided with GR-DVL510 only. camcorder is turned on, as this may cause the NOTE: memory card to be corrupted or cause the... - Page 15 VIDEO RECORDING & PLAYBACK VIDEO RECORDING & PLAYBACK CONTENTS VIDEO RECORDING ....... 16 – 20 Basic Recording ........16 Journalistic Shooting ........ 17 Self-Recording ........17 Operation Mode ........17 Zooming ..........18 Video Light .......... 19 Time Code ..........20 VIDEO PLAYBACK ......
-
Page 16: Video Recording
..rotate the MENU/BRIGHT wheel until the bright level indicator on the display moves and the appropriate brightness is reached. •If you are using the GR-DVL915/DVL815, it is also possible to adjust the brightness of the viewfinder by closing the LCD monitor and adjusting as described above. -
Page 17: Journalistic Shooting
(GR-DVL310 only). • Allows you to display a still image stored in the memory card or to transfer a still image stored in the memory card to a computer (GR-DVL915/DVL815/DVL510 only). When the Power Switch is set to “ ”, “... -
Page 18: Zooming
VIDEO RECORDING (cont.) Zoom in (T: Telephoto) Zooming FEATURE: PURPOSE: 1 x W 10 x W To produce the zoom in/out effect, or an instantaneous 20 x W change in image magnification. 40 x W OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Zoom out (W: Wide angle) Slide the Power Zoom Lever towards “W”. -
Page 19: Video Light
39) is materials. engaged, the light will not activate. It is recommended that you consult your • While the “Night-Alive” mode ( pg. 38) is nearest JVC dealer for replacing the video engaged, the light will not activate. light. -
Page 20: Time Code
VIDEO RECORDING (cont.) Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). -
Page 21: Video Playback
2) Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse Frame-By-Frame Playback during Still Playback. To resume normal playback, press 4/6. ● If you are using the GR-DVL915/DVL815, you can also use the provided remote control for Frame-By-Frame Playback ( pg. 59). -
Page 22: Connections
VIDEO PLAYBACK (cont.) Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input connectors Connector cover* S-Video cable To TV or VCR... - Page 23 YTU94146A S-Video cable. If using a VCR . . . go to step 3. Consult the JVC Service Center described on the If not . . . go to step 4. sheet included in the package for details on its availability.
-
Page 24: Blank Search
( pg. 20). Load a tape ( pg. 12). Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/ DVL815/DVL510 only), then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. - Page 25 DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK The D.S.C. (Digital Still Camera) features are available on GR-DVL915, GR-DVL815 and GR-DVL510. CONTENTS D.S.C. RECORDING ....... 26 – 27 Basic Shooting (Snapshot) ....26 – 27 D.S.C. PLAYBACK ......28 – 36 Normal Playback ........
-
Page 26: D.s.c. Recording
D.S.C. RECORDING Basic Shooting (Snapshot) SNAPSHOT Button You can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( pg. 8) ●... - Page 27 To Delete Unwanted Still Images . . . PIN-UP ..when unwanted still images are stored in the memory Pin-Up mode* card or its memory is full, refer to “Deleting Images” pg. 32) and delete unwanted still images. To Remove The Shutter Sound ..
-
Page 28: D.s.c. Playback
D.S.C. PLAYBACK Normal Playback Fast-Forward (3) Button Lock Button Images shot with the camcorder are automatically Play (4/6) Button numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much Rewind (2) like flipping through a photo album. -
Page 29: Index Screen
INDEX Screen Picture quality The images you shot can be displayed together with their Index number Selected image index information. Convenient for checking images shot beforehand, the INDEX Screen also shows the Picture < > E X I T I N D E X quality as well as which images are protected against 100-DVC00003 accidental erasure. -
Page 30: Jump Playback
D.S.C. PLAYBACK (cont.) Jump Playback MENU/BRIGHT Wheel When viewing still images stored in a memory card, you JUMP Button can call up directly an image you want to view by specifying its index number. Press JUMP during Normal Playback ( pg. -
Page 31: Protecting Images
Protecting Images MENU/BRIGHT Wheel The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality indication, that image cannot be deleted. Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “... -
Page 32: Deleting Images
D.S.C. PLAYBACK (cont.) Deleting Images MENU/BRIGHT Wheel Previously shot images can be deleted either one at a time or all at once. Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “ ” while pressing down the Lock Button. - Page 33 TO DELETE ALL IMAGES MENU/BRIGHT Wheel Before doing the following, perform steps 1 through 3 on pg. 32. Rotate the MENU/BRIGHT wheel to select “ALL” and press it. The Deletion Confirmation Screen appears. Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it. All the images are deleted. •To cancel deletion, rotate the MENU/BRIGHT wheel to select “CANCEL”...
-
Page 34: Setting Print Information
D.S.C. PLAYBACK (cont.) Setting Print Information (DPOF Setting) MENU/BRIGHT Wheel This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). - Page 35 TO PRINT BY SELECTING STILL IMAGES MENU/BRIGHT Wheel AND NO. OF PRINTS Perform steps 1 through 3 on pg. 34. Rotate the MENU/BRIGHT wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears. Rotate the MENU/BRIGHT wheel to move the green frame to the image you wish to print and press it.
-
Page 36: Initializing A Memory Card
D.S.C. PLAYBACK (cont.) Initializing A Memory Card MENU/BRIGHT Wheel You can initialize a memory card anytime. After initializing, all images and data stored in the memory card, including those which have been protected, are cleared. Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “... - Page 37 Dubbing To Or From A Video Unit With A DV Connector ... 53 Dubbing Images Stored In A Memory Card To A Tape ........54 (GR-DVL915/DVL815/DVL510 only) Dubbing Images Recorded On A Tape To A Memory Card ........55 (GR-DVL915/DVL815/DVL510 only) USING THE REMOTE CONTROL UNIT ......
-
Page 38: For Recording
CLASS I C F I LM STROB IMPORTANT: Some modes of Program AE with special effects cannot be used with certain Fade/Wipe Effects ( GR-DVL915/DVL815/DVL510 only 40, 41). If an unusable mode is selected, its indicator blinks or goes out. - Page 39 SHUTTER MONOTONE 1/60–The shutter speed is fixed at 1/60th of a Like black and white films, your footage is shot in second. Black bands that usually appear when B/W. Used together with the Cinema mode, it shooting a TV screen become narrower. enhances the “classic film”...
-
Page 40: Fade/Wipe Effects
You can also vary transitions from scene to scene. Set the VIDEO/DSC Switch to “VIDEO” IMPORTANT: (GR-DVL915/DVL815/DVL510 only), then set the Some Fade/Wipe Effects cannot be used with Power Switch to “ ” while pressing down the Lock certain modes of Program AE with special Button located on the switch. - Page 41 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. FADER — WHITE Fade in or out with a black screen. FADER — BLACK Fade in to a color screen from a black and white screen, or fade out FADER —...
-
Page 42: Snapshot (For Video Recording)
This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/ DVL815/DVL510 only), then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. -
Page 43: Auto Focus/Manual Focus
While focusing on a further While focusing on a nearer Focus detection zone subject subject Auto Focus FEATURE: PURPOSE: The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2") to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •When two subjects overlap in the same scene. -
Page 44: Exposure Control
FOR RECORDING (cont.) Exposure Control Iris Lock Use this function in the following situations: Manual exposure adjustment is recommended in the • When shooting a moving subject. following situations: • When the distance to the subject changes (so its • When shooting using reverse lighting or when the size in the LCD monitor or the viewfinder changes), background is too bright. -
Page 45: White Balance Adjustment
White Balance Adjustment Manual White Balance Operation A term that refers to the correctness of color Perform Manual White Balance when shooting under reproduction under various lighting. If the white various types of lighting. balance is correct, all other colors will be accurately Follow steps 1 through 4 of the white balance reproduced. -
Page 46: Using The Menu For Detailed Adjustment
USING MENUS FOR DETAILED ADJUSTMENT For Recording Menu MENU/BRIGHT Wheel This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( pg. 47 – 49) . Set the Power Switch to “ ”... - Page 47 Menu Screen Explanations Refer to “Fade/Wipe Effects” ( pg. 40, 41). WIPE/FADER Refer to “Program AE With Special Effects” ( pg. 38, 39). PROGRAM AE Refer to “White Balance Adjustment” and “Manual White Balance W.BALANCE Operation” ( pg. 45). Allows you to set the video recording mode (SP or LP) depending on your REC MODE preference ( pg.
- Page 48 16:9 movie. •The “CINEMA” mode is effective only when the VIDEO/DSC Switch is set to “VIDEO” (GR-DVL915/DVL815/DVL510 only). For playback on TVs with an aspect ratio of 16:9. Naturally expands the SQUEEZE image to fit the screen without distortion.
- Page 49 DISPLAY” settings are effective even when the Power Switch is set to “ ”. ● The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control (provided with GR-DVL915/DVL815 only) ( pg. 23, 52, 62).
-
Page 50: For Playback Menu
NOTES: ● It is also possible to change the ON SCREEN settings by pressing DISPLAY on the remote control (provided with GR-DVL915/DVL815 only). ● “REC MODE” can be set when the Power Switch is set to “ ” or “... - Page 51 For playback sound, tape For directory, file name, speed and tape running index number and total during video playback. number during D.S.C. playback (GR-DVL915/ DVL815/DVL510 only). DATE/TIME setting: pg. 28 – 36 (GR-DVL915/DVL815/DVL510 only) For date during D.S.C. playback (GR-DVL915/ DVL815/DVL510 only).
-
Page 52: Dubbing
NOTES: YTU94146A S-Video cable. ● After dubbing, set “S/AV INPUT” back to Consult the JVC Service Center described on the sheet “OFF”. included in the package for details on its availability. Make ● Analog signals can be converted to digital sure to connect the end with a core filter to the camcorder. -
Page 53: Dubbing To Or From A Video Unit With A Dv Connector
VC-VDV204U DV cable. To Use This Camcorder As A Recorder . . . 1. Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/DVL815/DVL510 only), then turn the Power Switch to “ ” while pressing down the Lock Button located on the switch. -
Page 54: Dubbing Images Stored In A Memory Card To A Tape (Gr-Dvl915/Dvl815/Dvl510 Only)
DUBBING (cont.) Dubbing Images Stored In A Memory Card SNAPSHOT Button To A Tape (GR-DVL915/DVL815/DVL510 only) Images can be dubbed from a memory card to a tape. Load a memory card ( pg. 14) and cassette pg. 12). To locate the point where you wish to dub a still image, play back the tape. -
Page 55: Dubbing Images Recorded On A Tape To A Memory Card (Gr-Dvl915/Dvl815/Dvl510 Only)
● To use Playback Special Effects with a video image you wish to dub, perform up to step 8 using the remote control (provided with GR-DVL915/DVL815 only) pg. 59). VIDEO/DSC Switch (Open the LCD monitor... -
Page 56: Using The Remote Control Unit
USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic RM-V716U operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. For GR-DVL510/DVL310 Owners: If you want to –... - Page 57 & RM-V716U (Provided with GR-DVL915/ DVL815 only) Functions With the camcorder’s Power Switch With the camcorder’s Power Switch Buttons set to the camera position set to “ ”. (“ ” or “ ”) . Infrared beam transmitting window Transmits the beam signal.
- Page 58 USING THE REMOTE CONTROL UNIT (cont.) RM-V715U (Provided with RM-V700U (optional) GR-DVL510/DVL310 only) & Functions Buttons With the camcorder’s Power Switch set to With the camcorder’s Power Switch set the camera position (“ ” or “ ”) . to “ ”.
-
Page 59: Slow-Motion Playback (Gr-Dvl915/Dvl815 Only)
Remote sensor Slow-Motion Playback FEATURE: (GR-DVL915/DVL815 only) PURPOSE: To allow slow-speed search in either direction during video playback. OPERATION: 1) To change from normal to Slow-Motion Playback, press SLOW (9 or 0) more than approx. 2 seconds. After approx. 1 minute in Slow Rewind or approx. 2 minutes in Slow Forward, normal playback resumes. -
Page 60: Playback Zoom
Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in. 3) For GR-DVL915/DVL815 Owners: You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT,... - Page 61 (A) (B) NAME (A) (B) Editing. PHILIPS IMPORTANT Although the MBR is compatible with JVC VCRs and PANASONIC those of many other makers, it may not work with yours or may offer limited functions. HITACHI NOTES: ● If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.
- Page 62 **** Provided with GR-DVL915/DVL815 only. • YTU94146A S-Video cable. • YTU94154A Editing cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder.
- Page 63 RM-V716U RM-V700U recently registered point. (Provided with (optional) • For GR-DVL915/DVL815 Owners: If you are not GR-DVL915/ using Fade/Wipe or Program AE with special effects, DVL815 only) repeat steps 6 and 7 only. NOTES: ●...
-
Page 64: Random Assemble Editing
● Random Assemble Editing may not function properly when using a tape including several duplicated time codes ( pg. 20). REC STBY PAUSE R.A.EDIT ON/OFF ON/OFF RM-V716U RM-V700U (Provided with (optional) GR-DVL915/ DVL815 only) -
Page 65: For More Accurate Editing
Based on the diagnostics performed, you can now (Provided with (optional) advance the VCR’s record timing by rotating the GR-DVL915/ MENU/BRIGHT wheel towards “+”. You can also DVL815 only) delay the VCR’s record timing by rotating the MENU/ BRIGHT wheel towards “–”. The adjustment range is from –1.3 to +1.3 seconds, in 0.1-second increments. -
Page 66: Audio Dubbing
83). PAUSE ● To perform Audio Dubbing with a video unit connected to the camcorder’s AV connector, first set “S/AV INPUT” RM-V716U RM-V715U to “ON” in the Menu Screen (GR-DVL915 only (Provided with (Provided with pg. 50). GR-DVL915/ GR-DVL510/... -
Page 67: Insert Editing (Gr-Dvl915/Dvl815/Dvl510 Only)
Insert Editing (GR-DVL915/DVL815/DVL510 only) You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged. NOTES: ● Before performing the following steps, make sure that “TIME CODE”... -
Page 68: System Connections
● When using a DV cable, be sure to use the optional VIDEO/DSC switch to “DSC”. JVC VC-VDV206U or VC-VDV204U DV cable •Only the still images stored in the memory depending on the type of DV connector (4 or 6 pins) card can be transferred to a PC. -
Page 69: Connection To A Video Unit With A Dv Connector
● Also refer to the instruction manuals of the connected units. ● When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable. To PC ● When using a cable supplied with a core filter, be sure... - Page 70 REFERENCES REFERENCES CONTENTS DETAILS ..........71 TROUBLESHOOTING ......72 – 76 USER MAINTENANCE ......77 INDEX ........78 – 84 Controls, Connectors And Indicators ..78 – 79 Indications ........80 – 84 CAUTIONS ........85 – 87 TERMS ........88 – 89 SPECIFICATIONS ......
-
Page 71: Details
DETAILS I T E M S N O T E S Perform charging where the temperature is between 10°C and 35°C Power (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal pg. 8) temperature range for charging. If the environment is too cold, charging may be incomplete. -
Page 72: Troubleshooting
TROUBLESHOOTING If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes;... - Page 73 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 9. The color of Snapshot looks 9. • The light source or the subject 9. • Find a white subject and strange. does not include white. Or compose your shot so that it there are various different also appears in the frame light sources behind the pg.
- Page 74 TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 16. The picture wipe function 16. • The Slow Shutter mode is 16. • Disengage the Slow Shutter does not work. activated. mode or set “WIDE MODE” • “WIDE MODE” is not set to to “OFF”...
- Page 75 LCD monitor become dark. Consult your nearest JVC dealer. 28. The rear of the LCD monitor 28. • The light used to illuminate 28. • Close the LCD monitor to turn is hot.
- Page 76 If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. 42. The charger indicator on the 42. • The temperature of the battery 42. • To protect the battery, it is camcorder does not light.
-
Page 77: User Maintenance
USER MAINTENANCE After Use Cleaning The Camcorder Turn off the camcorder. To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it Slide and hold OPEN/EJECT in the direction of well to wipe off heavy dirt. Then wipe again the arrow, then pull the cassette holder cover with a dry cloth. -
Page 78: Index
INDEX Controls, Connectors And Indicators 3 4 5 6 7 &... - Page 79 Connect the editing cable when performing Battery Release Switch Random Assemble Editing ..pg. 61 – 65 [BAT. RELEASE] ........pg. 8 •Edit Connector [EDIT] (GR-DVL915/DVL815/ •MENU Wheel [+, –, PUSH] ....pg. 46 DVL510 only) ........pg. 62 •LCD Monitor BRIGHT Audio/Video Input (GR-DVL915 only)/Output (Brightness) Control [+, –] ....
-
Page 80: Indications
5 seconds after turning on the camcorder. pg. 47) Displays the Time Code. pg. 20, 49) LCD Monitor/Viewfinder Indications During D.S.C. Recording Only (GR-DVL915/DVL815/DVL510 only) Appears when the VIDEO/DSC Switch is set to “ ” and the Power Switch is set to “ ” or “... - Page 81 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording 40 x PHOTO I GHT ’ Appears when the Power Switch is set to “ ”. Appears when the iris is locked. pg. 44) pg. 17) Appears when Digital Image Stabilizer (“DIS”) is •...
- Page 82 21) The level indicator moves. Displays the time code. pg. 50, 51) LCD Monitor/Viewfinder Indications During D.S.C. Playback (GR-DVL915/DVL815/DVL510 only) Displays the index number of the file. pg. 28) Displays the directory and file name. pg. 28) Displays the total number of stored files.
- Page 83 ● Appears when the built-in clock battery runs out and the previously set SET DATE/TIME! date/time is erased. Consult your nearest JVC dealer for replacement. Appears for 5 seconds after power is turned on if the lens cap is attached.
- Page 84 Remove the power supply (battery, etc.) and wait a few MODE REMOVE AND minutes for the indication to clear. When it does, you can resume using the REATTACH BATTERY camcorder. If the indication remains, consult your nearest JVC dealer.
-
Page 85: Cautions
1. To avoid hazards . . . Plug”, as shown..do not burn. For this AC plug adapter, consult your nearest JVC dealer..do not short-circuit the terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag. - Page 86 ... allow inflammables, water or metallic objects to using the unit for about 1,000 hours. For periodic enter the unit. check-ups please consult your nearest JVC dealer..remove the battery pack or disconnect the power supply while the power is on.
- Page 87 If malfunctioning occurs, stop using the unit determined by turning the equipment off and immediately and consult your local JVC dealer. on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
-
Page 88: Terms
TERMS AC Adapter ..........pg. 8, 9 Fade-In/Out ........pg. 40, 41 Analog Input ........pg. 50, 52 Fast-Forward The Tape ......pg. 21 Audio Dubbing ........pg. 66 Frame-By-Frame Playback ....pg. 21, 59 Auto Date ..........pg. 49 Auto Focus .......... - Page 89 Picture Quality Mode ....... pg. 14 Tally ............pg. 48 Picture Wipe/Dissolve ......pg. 40, 41 Tele Macro ..........pg. 48 Playback Special Effects ......pg. 59 Time Code ......pg. 20, 49, 50, 51 Playback Zoom ........pg. 60 Tripod Mounting ........
-
Page 90: Specifications
: 83 mm x 97 mm x 188 mm (3-5/16" x 3-7/8" x 7-7/16") (with the LCD monitor closed and the viewfinder pushed down) Weight : Approx. 610 g (1.4 lbs) (GR-DVL915) Approx. 600 g (1.4 lbs) (GR-DVL815) Approx. 590 g (1.3 lbs) - Page 91 Approximate number of storable images with memory card [8 MB] (provided with GR-DVL510 only) FINE : 100 STANDARD : 200 with memory card [16 MB] (provided with GR-DVL915/DVL815 only) FINE : 200 STANDARD : 400 with memory card [32 MB] (optional)
- Page 92 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD. 1200HOV...