Cisco Nexus 9504 Hardware Installation Manual page 22
Nx-os mode switch
Hide thumbs
Also See for Nexus 9504:
- Hardware installation manual (138 pages) ,
- Configuration manual (11 pages) ,
- Hardware installation manual (8 pages)
Table of Contents
Advertisement
Clearance Requirements
2
Vertical rack-mount posts and rails
3
Nearest object or inside of cabinet (no side
clearance required)
4
Air intake from the cold aisle for all modules
and power supplies
5
Air exhaust to the hot aisle for all modules and
power supplies
6
No left side clearance required (no airflow on
left side)
7
Chassis width
8
No right side clearance required (no airflow on
right side)
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
12
10
Clearance area required at the rear of the chassis
within the cabinet (if used) or to the edge of the
hot aisle (if no cabinet) for module handles
11
Chassis depth
12
Clearance required between the front of the
chassis and the inside of the cabinet (if used) or
the edge of the cold aisle (if no cabinet) for cable
management and ejector handles on I/O modules
13
Front service clearance required for installing
the chassis and replacing the modules on the front
of the chassis
14
Width of the chassis plus vertical mounting
brackets on each side
15
Side clearance required by the front of the chassis
for rotation of I/O module handles (keep this area
clear of rack, cable management, and other
components that can prevent full rotation of the
ejector levers)
Preparing the Site
Advertisement
Table of Contents
