Table of Contents
Advertisement
Installing the Cisco 810 ISR
Figure 2-11
Figure 2-11
CEILING
GRID
WIDTH
1
2
Additional Adapters for Channel and Beam Ceiling Rails
The most common type of suspended ceiling support rail (the support for the ceiling tiles) is the ceiling
Tile rail or T-rail for short. You can attach a ceiling grid clip directly to a T-rail ceiling rail. However,
other types of ceiling rails, such as channel rails and beam rails, require an additional adapter clip
(AIR-CHNL-ADAPTER). You need two adapter clips for each router. Set screws on the clips hold them
securely on the ceiling rail.
Figure 2-12
Cisco Access Point installed with mounting bracket, ceiling grid clip, and adapter clips.
Cisco Integrated Services Router Hardware Installation Guide
2-12
shows a ceiling grid clip.
Ceiling Grid Clip
1
2
3
38
24
15
MM
INCH
1-1/2
15/16
9/16
A
B
C
2
1
Locking screws
Bracket screw holes
shows the three types of ceiling rails: T-rail, channel, and beam.
2
3
2
3
T-rail width detents (A, B, or C)
Chapter 2
Installing the Router
Figure 2-13
shows the
Hide quick links:
Advertisement
Table of Contents
