Table of Contents
Advertisement
Section
Mode
Security Mode
Channel Selection
Channel
Network Password
OL-29163-01 Rev A
Field Description
Choose one of these options for the network mode:
8.2.11n
802.11 g/n
802.11 b/g/n
Important: When TKIP authentication only is selected, B/G/N Mixed
network mode is not available.
Choose one of these options for the security mode
Open (risky)
64 bits (5 Ascii characters or 10 Hex digits)
128 bits (13 Ascii characters or 26 Hex digits)
WPA-PSK(TKIP) (8 to 63 Ascii characters or 64 Hex digits)
WPA-PSK(AES) (8 to 63 Ascii characters or 64 Hex digits)
WPA2-PSK(TKIP) (8 to 63 Ascii characters or 64 Hex digits)
WPA2-PSK(AES) (8 to 63 Ascii characters or 64 Hex digits)
WPA2-PSK(TKIP/AES) (8 to 63 Ascii characters or 64 Hex digits)
WPAWPA2-PSK(TKIP/AES) recommended (8 to 63 Ascii
characters or 64 Hex digits)
Note: Not all wireless adapters support WPA2. WPA is
supported across a wider range of devices. Whether you use
WPA or WPA2, make sure to use a "strong" passphrase. A strong
passphrase is a string of random characters at least 21 characters
in length.
Choose Automatic or Manual.
Automatic. You can select Automatic (factory default) for automatic
channel selection. If Manual is selected, user would be able to select
and set channels.
In Channel Selection, if Manual option is chosen, user can select a
channel from 1 through 11. Only channels 1, 6 and 11 are non-
overlapping channels.
Depends on Security Mode selected, the Network Password can have
different requirements which are explained in Security Mode. The
factory set password value can be found on the label located on the
bottom of your Wireless Residential Gateway.
To make the Network Password become visible to the user or not.
Every time the page is opened this box is unchecked for the security
reasons.
Configure Wireless Settings
25
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
