Page 1
Contents 1. Precautions 2. Product specifications 3. Disassembly and Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram UN46C9000ZF / UN55C9000ZF Refer to the service manual in the GSPN (see the rear cover) for the more information.
Page 4
3. Disassembly and Reassemble 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the UN46/55C9000ZF LED TV. WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 5
3. Disassembly and Reassemble Description Picture Description Screws 3. Remove screw from rear cover. 6003-000133 (M4, L8, MACHINE) Lift up the Stand. in case of wall-mount 1. Remove the TV from Wall. 2. Remove the Screws from Stand Box. 6003-000133 (M4, L8, MACHINE) 3.
Page 6
3. Disassembly and Reassemble Description Picture Description Screws 4. Remove screw from stand box, lift up the stand box cover. 6003-001003 (M4, L12, TAPTYPE) 5. Remove the Main board. Lift up the Woofer. Remove the cable from Main_docking board. Remove the screw of the Main_docking board and lift up LVDS connector locking of main board.
Page 7
3. Disassembly and Reassemble Description Picture Description Screws Remove the Main_docking board. Remove the screw of main board. 6001-002283 (M3, L5, Machine) Remove the main board. * when remove the main board, sliding to the left and lift up 6. Remove the screw of IP board. 6001-002283 (M3, L5, Machine) 7.
Page 8
3. Disassembly and Reassemble Description Picture Description Screws Detach the cable connected to T-con Board and Remove the screw of T-con. * If is not perfect connection, may cause vertical noise. So, be careful. 6001-002283 (M3, L5, Machine) Remove the screw of Panel_docking board.
Page 9
3. Disassembly and Reassemble Description Picture Description Screws 9. Remove the Male Docking board from stand. Remove the screw from Stand bottom. 6001-002283 (M3, L5, Machine) Remove the male Docking PCB from Stand bottom. * When assenbling the Female Docking PCB, tighen screw then back out 1 and 1/2 turns to leave the board loose.
Page 10
3. Disassembly and Reassemble Description Picture Description Screws Remove the cable from Female Docking PCB bottom. * When assemble the Docking PCB, be careful of the direction of cable. 10. Remove the cable between Male Docking PCB and Female Docking PCB. * Remove the Screws from Stand.
Page 11
3. Disassembly and Reassemble Assemble Caution Description Picture Description 1. When you do assemble. If do not attach the filament tape on speaker cable, the cable can be pressed by stand cover. 2. After repair the board. (Main board or sub docking boards). you can check the TV working condition by connecting male and female docking board without assembling the Stand.
Page 12
3. Disassembly and Reassemble Assemble Caution Description Picture Description Docking PCB Assembly method Male DOCKING PCB + STAND 1. Get wires connected with Docking PCB bottom. 2. Put wires though neck as side picture. 3. Fasten Screw on the top of Docking PCB bottom.
Page 13
5. Exploded View & Part List 5. Exploded View & Part List 5-1. UN46C9000ZF Exploded View PANEL SC02A M0014 T001 SP01A M0015 SP01A P001A FB20A SP01A...
Page 14
5. Exploded View & Part List 5-2. UN46C9000ZF Parts List Description & Specification Location No. Code No. Q’ty SA/SNA Remark FB20A BN96-14587A ASSY BOARD P-TOUCH FUNCTION;UC9Z 46,MGMP M0014 BN94-03519A ASSY PCB MAIN;UN46C9000ZFXZA M0015 BN94-03610A ASSY PCB MISC-MAIN BOX SECOND;UN46C9000Z P001A BN44-00364A DC VSS-LED TV PD BD;PD55BF2_ZDY,PD55BF2_...
Page 15
5. Exploded View & Part List 5-2-1. UN46C9000ZF Parts List Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE) Description & Specification Level Location No. Code No. Q’ty SA/SNA Remark BN91-05555A ASSY SHIELD;UN46C9000ZFXZA T0081 6001-002283 SCREW-MACHINE;BH,+,M3,L5,ZPC(WHT),SWRCH1 M0081 6003-000337 SCREW-TAPTYPE;BH,+,S,M4,L10,ZPC(BLK),SWR M0081 6003-001003 SCREW-TAPTYPE;BH,+,B,M4,L12,ZPC(BLK),SWR...
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
2. Product specifications 2. Product specifications 2-1. Feature & Specifications Model UN46C9000ZF Feature Digital-TV, RF, 4-HDMI, 1-Component, 1-AV, 2-USB, D-sub, Optical Out, Ethernet, RS232C, PC Audio In ሪ Brightness : 450cd/m ሪ Contrast Ratio : Mega CR ሪ Response time :3ms ሪ...
Page 55
2. Product specifications Model UN55C9000ZF Feature Digital-TV, RF, 4-HDMI, 1-Component, 1-AV, 2-USB, D-sub, Optical Out, Ethernet, RS232C, PC Audio In ሪ Brightness : 450cd/m ሪ Contrast Ratio : Mega CR ሪ Response time : 3ms ሪ Dynamic contrast, Super-PVA ሪ PIP(in HDMI 1,2,3,4, component,PC Mode and Sub picture is available in TV analog and digital mode) ሪ...
2. Product specifications 2-2. Spec Comparison to the Old Models UC9Z UB7W Model (UN46C9000ZF / UN55C9000ZF) (UN40B7000WF / UN46B7000WF / UN55B7000WF) Design Display Type LED TV LED TV Resolution 1920 x 1080 1920 x 1080 LCD Panel TFT LCD PANEL 240Hz...
2. Product specifications 2-3. Detail Factory Option If you replace the main board with new one, please change the factory option as well. ※ The options you must change are “Type". Model Name UN46C9000ZF UN55C9000ZF Vendor Panel CODE BN95-00398A BN95-00399A...
2. Product specifications 2-4. Channel Table CHANNEL FREQUENCY TABLE OUTPUT FREQUENCY : ANALOG fv:45.75MHz, fs:41.25MHz DIGITAL Fc:44MHz TUNING STEP SIZE : FIRST PLL 250KHz SECOND PLL 62.5KHz OSD CH NO CH NO CH NO CH NO OSD CH NO CH NO CH NO CH NO...
Support Horizontal/Vertical View Mode 10 Internet@TV Contents Unity Launcher : Internet widget, Flash, Game, Yahoo, Gallery etc. Samsung Apps : Support Download/Installation of Free/Non-Free Contents Unity Launcher. PIA: Movement to the Image, advertisement(flash type), detailed advertisement.
Page 60
A Function to purchase charged contents To control purchase lists person by person To control person's cash information that holding To realize Samsung place Rolling advertisement (type - image/movie/flash) Realize detailed page view of advertisement Contents lock setting Protect children by different lock according to the Widgets.
Page 61
Menu - Application - AllShare™ (Trident) A function of DLNA Server connection inform (icon mode) After the TV's on, if the Samsung DLNA server starts to activate, AllShare™ will sense it and display the server info [icon,name]. If the certain application [Content View etc.] is already performing, AllShare™...
Page 62
2. Product specifications Message Message : one of the function of AllShare™, checking the call from the cell phone, SMS information, schedule booked on mobile phone Media One of the function of AllShare™, showing videos, pictures, MP3 files of cell phone on TV by controlling the cell phone.
Page 63
2. Product specifications AllShare™ setup Function Message : On/off the Message function on TV. Media : On/off the media function on TV. TV name : Change the name of the TV showing on the mobile phone. AllShare™ Setup : Menu - Application - Content View - AllShare™...
Page 64
2. Product specifications Message: approach control TV allows the cell phone(201-123-4567) access to send message. TV blocks the cell phone(201-123-4567) access to send message to this TV set. after blocking like this, the cell phone cannot find TV set on the network, at all. IF the cell phone(201-123-4567) is not used at all, you can delete that entry from the access control list.
Page 65
2. Product specifications Message Play Sending Message while watching TV A call from someone while watching TV Delivered schedule note while watching TV while playing Media Play , if a message is delivered TV will show it in a small icon form (Exit Media Play in order to check detail information) Showing 20 seconds , 3 chances, 5 minutes term 2-12...
Page 66
2. Product specifications Media Play 3 SECONDS AFTER Sending Media while watching TV Media PLAY ON Press Exit or Return button on remote controller in order to cancel Media Play. Media play After Media Play finish, return to original mode 2-13...
Page 67
2. Product specifications AllShare™ setup and checklists Problem Possible Solution Deleted mobile phone list showing up • [Menu > Application > Content View > AllShare™ > Message] again. Where need to block the added mobile phone or device again. Because deleted device would be added again if that device turns on or attempt to approach.
Page 68
2. Product specifications 2-5-3. MediaBridge Function intro Home • UI and function Unity of TV and BD products • Adding PVR recording and PhotoStory function to 2009 MediaPlay • Supply device mode • Able to change the skin MediaBridge Home ◄ Browser •...
Page 69
2. Product specifications Player • Supply differentiated Player according to the Contents Adding 3 steps of Fast Forward and Fast rewind when playing Movie Adding Skip function when playing Music Picture Player ◄ Music Player ◄ Movie Player ◄ 2-16...
Page 70
2. Product specifications Movie Auto Chaptering function • Extract Chaptering automatically in movie file • Able to jump to the major scenes within the movie • Able to jump and play to the user’s favorite chapter Auto Chaptering function while playing movie ◄ Additional Contents classify method ...
Page 71
2. Product specifications Contents Movement among devices • USB -> internal flash memory / internal HDD (BD products) copy • DLNA server -> internal flash / internal HDD Download • Local Device -> DLAN server Upload PhotoStory Create •...
Page 72
2. Product specifications Appliance of Single Live UI • Apply motion effect on Premium Products - When move icons of home display - Shuffle effect of the picture - Showing simple menu and sliding effect of arranged popup windows at Brower display - Motion effect by enlargement of message box at Browser display - Effect of enlargement of contents choice window at Photostory - Fade-in/Fade-out effect when playing Contents...
Page 73
2. Product specifications 2-5-4. Internet@TV Overlay Mode It offers contents to maximize the benefits of the large screen size. A. In overlay mode, the video plays in its native size, covering up to the full screen. Graphical elements in the graphical plane are overlaid on top of the video plane. B.
Page 74
2. Product specifications 2-5-5. Yahoo OOBE Description A. All users go through OOBE (Guided Setup) to access the dock the first time. B. All users must specify a location and accept the TOS before the TV Widgets service are accessible. The rest of the screens are optional.
Page 75
2. Product specifications Tutorial: Screens explaining how dock works. Tutorial: Screens explaining the sidebar and global nav buttons. Final screen before dock comes up. 2-22...
Page 76
2. Product specifications 2-5-6. Gallery Widget Overview A. In the TV Widgets, widget gallery services are online services where widget developers publish widgets for download. B. The default widget gallery for the platform is the Widget Gallery Services. C. To find and install new widgets, launch the gallery widget from the dock. D.
Page 77
2. Product specifications 2-5-7. Profile Widget Overview A. The Profile widget is the way to configure your widget environment for your user profile. With the settings widget you can configure: i. Profile Management: Create, edit and switch profiles. ii. Security Settings: Setup a Profile and/or Owner PIN for security purposes. iii.
Page 78
2. Product specifications 2-5-8. Flickr TV Widget Description A. Flickr TV Widget is a Widget for displaying photos from Flickr. You can view your: Personal photos Your sets of photos iii. Explore Flickr’s user community photos Your favorite photos Your contacts’...
Page 79
2. Product specifications Initial Sidebar View A. If the user is not signed and user is signed but user has no photo then the default images will be displayed from the Flickr Explore category. B. If the user is signed in and the user has 1 photo or more photos, then the photos will be displayed in the top portion of the Widget Sidebar.
Page 80
2. Product specifications 2-5-9. Weather Widget Overview A. The Weather Widget utilizes the “Tab View" layout of the Widget Sidebar i. The tab view is a viewable area than contains groups of user interface elements organized under tab headers. ii.
Page 81
2. Product specifications 2-5-11. News Widget Overview A. The News Widget sidebar will then be displayed B. Several stories will be displayed in the top featured area of the Widget Navigation will be available to move from one story to the next These stories are automatically updated by Yahoo! iii.
Page 82
2. Product specifications 2-5-12. 3D Display What is 3D Display? • A system that display 3D images artificially • How ? Using binocular time delay 1 Left eye recognizes left image, right eye recognizes right image. 2 Human eyes be far away each other 65mm horizontally.
Page 83
2. Product specifications 3D Supporting Formats HDMI Comp. (VOD) Top-Bottom A(PC) Side by Side A(PC) Line by line PC only Vertical Stripe PC only PC only Frame Seq. * 60Hz only Checker BD PC only 2D 3D N A : Support in 720P, 1080I, 1080P resolution I PC : Support in PC resolution, 1:1 original Size I O : Always support regardless of resolutio 3D Format Test ...
Page 84
2. Product specifications Other 3D patterns Checker Board Frame Sequential Line by Line Side by Side (Horizontal Stripe) Top & Bottom Vertical Stripe 2-31...
Page 85
2. Product specifications 2-5-13. 3" Premium Remote What is 3" Premium Remote Gives more convenient access to your TV & Legacy devices • Universal Remote Control : One Remote Controller for your TV, STB and AV devices in living room. •...
Page 86
• If the TV and Wireless Router are connected to wired network, go to step 7-1. Wired • If the TV and Wireless Router are connected to Wireless wireless network using the “Samsung Wireless LAN Adapter”, go to step 7-2. Skip 2-33...
Page 87
Touch Remote Stand Side go to step 8 to connect the Touch Remote and AP. Panel Wireless (If you want to use the SAMSUNG Wireless Router LAN Adapter(WIS09ABGN, WIS09ABGN2 <Wireless Network Connection> or WIS10ABGN ), you should use a gender...
Page 88
Deny If you do not use the AP Connect the “SAMSUNG Wireless LAN Adapter” to the TV. - If the “SAMSUNG Wireless LAN Adapter” is already connected to the TV, establish the connection again. Stand Side Panel Stand Side Panel...
Page 89
INFO : Displays information on the TV screen. EXIT : Exits the menu. Use these buttons in Media Play and Anynet+ modes. : Controls recording for Samsung recorders that have the Anynet+ feature) Keyboard Buttons used in the Channel TV Control Services List, Internet@TV, Media Play menu, etc.
Page 90
2. Product specifications Services With Services, you can go directly to an item which was originally set on the main screen. Play the program of the main Twin TV Control Services TV on the remote screen display simultaneously. Listen to or view the music, Multimedia movies, and pictures on your PC.
Page 91
In the Services main screen, Touch TV Control Services to manage the HOT-KEYS. 2. Product specifications HOT-KEY menu To modify or delete a hot key, drag and ● HOT-KEY menu drop the hot key to In the Services main screen, Touch Tap <Done>...
Internet@TV: You can use various internet services and view useful information and entertaining content (p. 50). y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 57). y Self Diagnosis: You can check whether picture or sound operate normally (p. 30).
4. Troubleshooting 4. Troubleshooting 4-1. Troubleshooting Check the various cable connections first. • Check to see if there is a burnt or damaged cable. • Check to see if there is a disconnected or loose cable connection. • Check to see if the cables are connected according to the connection diagram. Check the power input to the Main Board.
Page 94
4. Troubleshooting Simple flow chart of malfunction Does the TV turn on? Can you see anything on the screen? Can you see OSD menu running on the screen? Can you see Digital Channel broadcast ? Check LVDS cable connected Check the Power Cord to Main Board.
Page 96
Connected Home or Screen Share function which are found on Samsung Smartphones. • Check that the PC Share Manager is enabled, the Samsung TV is set to allow connections and the ScreenShare function on the connected cell phone is enabled. •...
Page 97
4. Troubleshooting Possible Solution Problem • ScreenShare Server I cannot find the remote control service Check that the ScreenShare Client device is correctly connected to the network of provided by the ScreenShare Server from the the sharing device that the DTV is connected to. ScreenShare Client.
Page 98
To connect to the AP, set the Encryption type to AES. If Pure High-Throughput 802.11n mode (or Greenfield 802.11n mode) is selected and the Encryption type is set to AES, your Samsung TV will connect to the AP providing you with optimum performance.
Page 99
• If Samsung Wireless Link is Off or the product does not have the Samsung auto-configuration and a message that it is Wireless Link function, please retry searching to find the sharing device. (May not connecting is displayed only.
Page 100
After I have created my account and logged • This occurs because you are not connected to your partner account for Samsung into the system, when I enter My Apps or My Apps. Connect to your partner account on the Settings page using your actual PC- Cyber Cash on My Page, the message "Your...
Page 101
4. Troubleshooting Possible Solution Problem I cannot log into Twitter. • To use Twitter, you must log in to it first. Create your account on the Settings page, register your created account on the Twitter website (www.twitter.com), and then log in to Twitter using your registered ID.
Page 102
4. Troubleshooting 4-1-1. No Power The PD board relay does not work when connecting the power cord. Symptom The units appears to be dead. The PD relay does not work when connecting the power cord if the cables are improperly connected or the Main Board or PD is not functioning.
Page 104
4. Troubleshooting 4-1-2. No Video (Analog PC signal) Symptom Audio is normal but no picture is displayed on the screen. Check the PC source Major Check the IC1001(Valencia) checkpoints Check if the LVDS cable is loose or not. No video Input an analog PC signal.
Page 106
4. Troubleshooting WAVEFORMS PC Input (V-Sync, H-Sync) LVDS Out (CLK + / -) 4-14...
Page 107
4. Troubleshooting 4-1-3. No Video (HDMI - Digital Signal) Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source Major Check the IC1001(Valencia) checkpoints Check if the LVDS cable is loose or not. No video Input an HDMI signal.
Page 109
4. Troubleshooting WAVEFORMS HDMI Input (CLK + / -) Tuner CVBS Out (Pattern: Grey Bar) TS DATA Out (Clk, Data [0]) 4-17...
Page 110
4. Troubleshooting 4-1-4. No Video (Tuner_CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source Major Check the Valencia checkpoints Check if the LVDS cable is loose or not. No video Check the RF source and Input the RF signal.
Page 112
4. Troubleshooting WAVEFORMS Tuner CVBS Out (Pattern: Grey Bar) Eagle+ Out (Clk, H-Sync) 4-20...
Page 113
4. Troubleshooting 4-1-5. No Video (Tuner DTV) Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source Major Check the Valencia checkpoints Check if the LVDS cable is loose or not. No video Check the RF source and Input the RF signal.
Page 115
4. Troubleshooting WAVEFORMS Tuner CVBS Out (Pattern: Grey Bar) TS DATA Out (Clk, Data [0]) 4-23...
Page 116
4. Troubleshooting 4-1-6. No Video (Video CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source Major Check the Valencia checkpoints Check if the LVDS cable is loose or not. No video Check the video source and Input a video signal.
Page 119
4. Troubleshooting 4-1-7. No Video (Component) Symptom Audio is normal but no picture is displayed on the screen. Check the Component source Major Check the Valencia checkpoints Check if the LVDS cable is loose or not. No video Check component source and Input a component signal.
Page 122
4. Troubleshooting 4-1-8. No Sound Symptom Video is normal but there is no sound.. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect.. No sound Check the sound source and Input a sound signal.
Page 125
4. Troubleshooting UC9000 PD BOARD DIAGNOSIS General PD board Diagnosis Disconnect the wire between PD board and Main board. Short Circuit 22Pin and 24pin of CNM801 ▶ If the BLU on , we can consider PD board is acting correctly. LED Driver output diagnosis Measure voltage at CD477 or CD437 which are criteria for judgement Measure voltage at CD403 or CD418 which are criteria for judgement...
Page 126
4. Troubleshooting SMPS output diagnosis Measure voltage at below locations for SMPS output diagnosis B18VS B18VS B13V SW_POWER_OUT B13V SW_INERTER B13V B13V B13V B13V PWM2_DIMMING_OUT PWM_DIMMING_OUT When 3D glass seems to have a trouble Use your mobile phone's camera function for TV has a problem.
Page 127
4. Troubleshooting Maximum distance from TV that 3D glass operates according to the angle 3~13 feet at 55° 19 feet at 45° 29 feet at 30° 32 feet at 15° 36 feet at 0° * Every model has a different angle and distance because front cover is different. Using Gender Cables Use gender cables between the TV and connecting devices.
4. Troubleshooting 4-2. Alignments and Adjustments 4-2-1. General Alignment instruction Usually, a color LED-TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. Use the specified test equipment or its equivalent. Correct impedance matching is essential.
Page 129
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1 Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : - If you do not have Factory remote - control Power OFF MUTE Power On 4-3-2 How to Access Service Mode Using the Customer Remote Turn the power off and set to stand-by mode Press the remote buttons in this order;...
Page 130
4. Troubleshooting 4-3-3. How to Access ‘EDID SUCCESS’ Mode At initial SERVICE MODE DISPLAY state, you’ll see ‘EDID SUCCESS’. - If not, go to Control EDID And follow the procedure. ON at EDID ON/OFF menu. EDID WRITE ALL menu, press ▶key of the remote control. After few seconds Success will appear. Failure appears, remove the PC cable and HDMI cable that connected to TV.
Page 131
4. Troubleshooting 4-3-4. Factory Data Option Factory Name Data Range Factory Reset Type 46A2UF9E/55A2UF9E Local Set Model UC9000 Tuner SEMCO Light Effect Ch Table Country Front Color W-Milky Control Factory Name EDID Sub Option PDP Option Shop Option Asia Option SOUND Config Option EDID...
Page 132
4. Troubleshooting Sub Option Factory Name Data Range Factory Name Data Range Region Info Link Server Type development PnP Language TTX List RF Mute Time TTX Group RS-232 Jack Debug ND ADJ Support Watchdog 24Px4 Support WD COUNT Power Indicator Support Dimm Type BD Wise Support...
Page 133
4. Troubleshooting SOUND Factory Name Range Factory Name Range High Devi STA Amp Scale 0x5Eh Carrier Mute ON/OFF STA Woofer Scale 0x6Eh Volume Curve Type1 STA Speaker EQ ON/OFF Pilot Level High Thld 0x30h STA Sub Woofer Pilot Level Low Thld 0x10h STA EQ CheckSum TW 0xA86138...
Page 134
4. Troubleshooting Factory Name Data Range SCC Mode SSC ON/OFF SSC Input Data Sscc Const sSCC Hx sSCC Hy sSCC Lx sSCC Ly pSCC Const pSCC Hx pSCC Hy pSCC Lx pSCC Ly SCC Source Data Swap 4-42...
Page 135
4. Troubleshooting Factory Name Range Factory Name Range Test Pattern FBE Pattern Sel LOGIC Pattern Sel LOGIC Level Sel READ PRE_PATT_SEL READ POST_PATT_SEL Reading PC Mode LDAsic Pattern Sel FRCS Patt before DDR FRCS Patt after DDR FRCS PC Mode On/Off Failure Panel Auto Setting Press ▶...
Page 136
4. Troubleshooting Expert Factory Name Data Range N/D ADJ Source ADC/WB Factory Name ADC Target ADC Result White Balance Factory Name Data Range AV Calibration Failure Comp Calibraion Failure PC Calibration Success HDMI Calibration Success ADC Target Factory Name Range Factory Name Range 1st_AV_Low...
Page 137
4. Troubleshooting ADC Result Factory Name Data Range 1st_Y_GH 1st_Y_GL 1st_Cb_BH 1st_Cb_BL 1st_Cr_RH 1st_Cr_RL 2nd_R_L 2nd_G_L 2nd_B_L 2nd_R_H 2nd_G_H 2nd_B_H White Factory Name Data Range Balance Sub Brightness R-Offset G-Offset B-Offset Sub Contrast R-Gain G-Gain B-Gain Movie R-Offset Movie B-Offset Movie R-Gain Movie B-Gain 4-45...
Page 138
4. Troubleshooting Advanced Factory Name Picture FBE3 WB Movie SubSetting Color Mapping EPA 3D CH_VDEC AR_ADC YC_Delay Sharpness Sharpness_LNA LNA_Plus LD Asic Reading LED Driver "Advanced" is hidden menu. You can not enter "Advanced" mode even you entered Service Mode using Factory Remote. FBE3 Factory Name Range...
Page 139
4. Troubleshooting WB Movie Factory Name Range Factory Name Range W/B MOVIE ON/OFF ON/OFF W2_Rgain MODE Dynamic W2_Bgain Color Tone W2_Roffset MSub Brightness W2_Boffset MSub Contrast Movie Contrast N_Rgain Movie Bright N_Bgain Movie Color N_Roffset Movie Sharpness N_Boffset Movie Tint W1_Rgain Movie Backlight W1_Bgain...
Page 140
4. Troubleshooting EPA 3D Factory Name Range Factory Name Range Standard Contrast V_3D PWM Delay_60 Standard Brightness V_3D ANA Delay_60 Standard Sharpness V_3D PWM Delay_50 Standard Color V_3D ANA Delay_50 Standard Tint Motion plus Delay Standard Backlight Home Delay 3D Contrast Shop Delay 3D Brightness CH_VDEC...
Page 141
4. Troubleshooting CH_DP Factory Name Range Factory Name Range BD_MAX_PERCENT_X BD_TOUCH_SUP_INV BD_MAX_PERCENT_Y DR_SIGMA_FIL_GAIN BD_DETAIL_AMT_MAX DR_GAIN_IN_ETE BD_TOUCH_SUPP SD2HD_Metric Sharpness Factory Name Range Factory Name Range Pre_GainH1 Post_GainPE2 Pre_GainH2 Post_GainPV1 Pre_GainH3 Post_GainPV2 Pre_GainV1 CTI_Gain Pre_GainV2 Pre_LTIH Pre_GainV3 LTI_H Post_GainH1 LTI_V Post_GainH2 PRE_CORING_H Post_GainH3 PRE_CORING_V Post_GainV1...
Page 143
4. Troubleshooting Factory Name Range Factory Name Range EmitOn 2D3D Depth4 EmitStartPosi60 2D3D Depth5 EmitStartPosi50 2D3D Depth6 EmitStartPosi48 2D3D Depth7 3DSyncVstart60 2D3D Depth8 3DSyncVend60 2D3D Depth9 3DSyncVstart50 2D3D Depth10 3DSyncVend50 N240 PWM Delay_60 3DSyncVstart48 N240 ANA Delay_60 3DSyncVend48 N240 PWM Delay_50 2D3D Focus N240 ANA Delay_50 2D3D Depth1...
Page 144
4. Troubleshooting FRCQ Factory Name Range Factory Name Range Option SSC_OnOff Film_Low_SD SSC_Width Film_Medium_SD SSC_Freq Film_High_SD FMD_Demo Film_Low_HD CSB Vertical Film_Medium_HD CSB Horizontal Film_High_HD X_VStabStatVid Video_Judder_Low X_VStabStatF Video_Judder_Med X_VStabCorF Video_Judder_High X_VStabSensF Hangup Detection X_HaloSizStatVid Q LVDS Sequence X_HaloSizStatF Q LVDS Format X_HaloSizCorF Q LVDS bit width X_HaloSizSensF...
Page 145
4. Troubleshooting 4-4. White Balance - Calibration 4-4-1 White Balance -Calibration ADC/WB AV Calibration Comp Calibration PC Calibration HDMI Calibration 4-4-2 Service Adjustment You must perform Calibration in the Lattice Pattern before adjusting the White Balance. Color Calibration Adjust spec. 1.
Page 146
4. Troubleshooting Method of Color Calibration (AV) 1) Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port 2) Press the Source key to switch to “AV1" mode 3) Enter Service mode 4) Select the “ADC/WB" and “ADB" menu 5) Select the “AV Calibration"...
Page 147
4-5. Servicing Information 4-5-1 Upgrading the Software Samsung may offer upgrades for TV’s firmware in the future. Please contact the Samsung call center at 1-800- SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
Page 148
1) The message “Does the problem still exist with this test pattern?" is displayed. 2) Press “Yes". This is a TV SET problem. The massage “Contact Samsung’s call center at 1-800-SAMSUNG for assistance." is displayed. 3) Press “No". This is not a TV SET problem.
Page 149
1) The message “Does the problem still exist with this sound test?" is displayed. 2) Press “Yes". This is a TV SET problem. The message “Contact Samsung’s call center at 1-800-SAMSUNG for assistance."is displayed 3) Press “No". This is not a TV SET problem.
6. Wiring Diagram 6-3. Connector Functions Connector Functions Supply power from SMPS to Main Board. CNM801 CN201 CN1602 T-CON The LVDS signal transfered from Main Board to Panel. 6-4. Cables Main-SMPS Main-Tcon Function Assy Code BN44-00364A BN96-14108C BN96-14587A Photo...