hit counter script

Switching Off The Water Softening System; Regeneration Of The Water Softening System - Siemens SP61IX05KE User Manual

Table of Contents

Advertisement

en Water softening system
Note: Only use special salt for
3.
dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special salt to the dis-
penser.
1
Funnel
Fill the dispenser right up with spe-
cial salt. The water in the dis-
penser is displaced and forced
out.
Place the lid back on the dis-
4.
penser and turn to close.
Switching off the water
softening system
If you find the special salt refill indic-
ator irritating, e.g. when using com-
bined detergents with salt replace-
ment substances, you can switch the
salt refill indicator off.
Note
To avoid damage to the appliance, only
switch off the water softening system in
the following cases:
¡ The water hardness is max. 26 °E
and you are using combined deter-
gents with salt replacement sub-
stances. According to manufactur-
ers, combined detergents with salt
replacement substances can gen-
1
Depending on the appliance specifications
24
¡ The water hardness is 0 - 8 °E.
1.
2.
a
a
3.
4.
a The water softening system is
Regeneration of the water
softening system
In order to obtain fault-free function of
the water softening system, the appli-
ance performs regeneration of the
water softening system at regular in-
tervals.
Regeneration of the water softening
system takes place before the end of
the main rinse cycle in all pro-
grammes. It will increase the run time
and consumption values, e.g. water
and electricity.
Overview of consumption values
with regeneration the water
softening system
Here you can find an overview of the
maximum additional run time and
consumption values during regenera-
tion of the water softening system.
Regeneration of the water softening
system after x rinse cycles
erally only be used up to a water
hardness of 26 °E without adding
special salt.
You do not need to use special
salt.
Press
⁠ .
To open the appliance settings,
press
is flashing on the display.
Press
repeatedly until no LED
lights up (level 0).
→ "Overview of water hardness set-
tings", Page 22
To save the settings, press
for 3 seconds.
switched off and the salt refill indic-
ator is deactivated.
for 3 seconds.
6

Advertisement

Table of Contents
loading

Table of Contents