Table of Contents
Related Manuals for Siemens WQ45G200ES
Summary of Contents for Siemens WQ45G200ES
- Page 1 Tumble dryer WQ45G200ES User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 8 Dryness level...... 25 1.1 General information.... 4 8.1 Changing the dryness level.. 25 1.2 Intended use....... 4 8.2 Adjusting the dryness level .. 25 1.3 Restriction on user group... 4 9 Programmes ....... - Page 3 16 Appliance care ...... 35 16.1 Preparing the appliance for the appliance care pro- gramme ......... 35 16.2 Preparing the condensation container for the appliance care programme..... 36 16.3 Starting the appliance care programme...... 37 16.4 Running the basic appli- ance care programme on the appliance...... 37 16.5 Preparing the appliance for the intensive appliance...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. ▶ Do not drink or reuse the condensation water from the appli- ance. Detergents and care products may result in poisoning if con- sumed.
-
Page 9: Safe Cleaning And Maintenance
Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Do not use hard scouring pads or ▶ 2 Preventing material cleaning sponges. Clean the appliance with nothing damage ▶ but water and a soft, damp cloth. Remove all detergent residue, Follow these instructions to avoid ma- ▶ spray residue or other residues im- terial damage and damage to the ap- mediately if they come into contact... -
Page 12: Energy Saving Mode
en Installation and connection Check the appliance for visible Observe the programme's maximum damage. load capacity. → "Programmes", Page 26 Open the appliance door. → "Basic operation", Page 29 a If the maximum load is exceeded, Remove any accessories from the this extends the programme dura- drum. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Included with Description Installation loca- Requirements the appliance tion Wool basket with In a washer-dryer Only use the ori- insert stack ginal connection set from the → "Wool basket", dryer manufac- Page 33 turer when set- ting up this appli- 4.3 Requirements for the in- ance in a stallation location... - Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 32.
- Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 33. → Page 32. Connect the appliance to the water outlet.
-
Page 16: Aligning The Appliance
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 28 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Air inlet Maintenance flap on the base unit → Page 42 Fluff filter → Page 30... -
Page 18: Wool Basket
en Familiarising yourself with your appliance 5.2 Wool basket Securing foot Wool basket Insert Tab for securing in the hook 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 29... -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 27 9,0 kg Recommended... -
Page 20: Buttons
en Display Display Designation Description Dryness level: Iron The dryness level is activated. → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 22 Plus Dryness level ad- The adjusted dryness level is activated. - Page 21 Display en Display Designation Description Drying Programme status Dryness level: Iron Programme status Dryness level: Programme status Cupboard Dry Anti-crease Programme status Pause Programme status End of pro- Programme status gramme Example...
- Page 22 en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description incio pausa+carga ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3s ¡ Activate Activate or deactivate the childproof lock. ¡...
- Page 23 Buttons en Button Selection Description seco ¡ seco ¡ Selecting seco activ- ates the dryness level. ¡ +1 The dryness level ¡ +2 defines how damp or ¡ +3 dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡ The dryness level can be adjusted by select- ing +1, +2 or +3.
- Page 24 en Buttons Button Selection Description termin. ¡ Programme end ¡ Set the programme end. ¡ Programme length The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
-
Page 25: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result extra seco Multi-layered, thick laundry The laundry is dry. that does not dry readily. -
Page 26: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 27: Timed Programmes
Programmes en Programme Description Max. load (kg) almohadas/almofadas Dry pillows stuffed with down or synthetic One pillow fibres. Note: Once the programme has ended, shake the pillows to distribute the stuffing and eliminate any pockets of moisture. camisas/business Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. -
Page 28: Accessories
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 52. Order number Connection kit To save space, stack the WZ27410 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 29: Laundry
QR code in the table of scanning the QR code in the table of contents or on www.siemens- contents or on www.siemens- home.bsh-group.com . home.bsh-group.com . -
Page 30: Starting The Programme
en operation Remove the laundry. 12.4 Starting the programme Note: If you want to change the time 12.8 Switching off the appli- until the programme ends, set the ance "Ready in" time first. Turn the programme selector to Press incio pausa+carga. ▶ ▶ a The display shows either the pro- 12.9 Fluff filter gramme duration or the "Ready in"... - Page 31 operation en Remove the two-part fluff filter. Open the two fluff filters. Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter.
-
Page 32: Condensation Container
en operation Close the two fluff filters and put Emptying the condensation them together. container If the drying programme has finished or the display shows a notification while the appliance is in operation, empty the condensation container. Requirements ¡ The display shows the following after drying: "End"... -
Page 33: Childproof Lock
Childproof lock en Press and hold the two 3s but- Inserting the condensation ▶ tons for approx. 3 seconds. container goes out in the display. Requirement: The condensation con- tainer → Page 32 is removed from the appliance. 14 Wool basket Push the condensation container ▶... -
Page 34: Starting A Programme With The Wool Basket
en Wool basket 14.2 Starting a programme Laundry item Programme duration in with the wool basket hours:minutes ATTENTION! Thin woollen Approx. 1:20 If items of laundry in the wool basket pullover touch the rotating drum or the ribs of Thick woollen Approx. 1:30 - the drum, the laundry may cause ma- pullover 3:00... -
Page 35: Basic Settings
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of Sports shoes Lift the tongues contents or on www.siemens- of the shoes. home.bsh-group.com . Remove the in- soles or heel cushions. -
Page 36: Preparing The Condensation Container For The Appliance Care Programme
en Appliance care Pull out the condensation con- Remove the stopper from the re- tainer, keeping it level. cess in the condensation con- tainer. Empty the condensation container → Page 32. Insert the plug from below. a The condensation container is 16.2 Preparing the condensa- ready for the appliance care pro- gramme. -
Page 37: Starting The Appliance Care Programme
Appliance care en peatedly until the basic appliance 16.3 Starting the appliance care programme has been run com- care programme pletely. Requirements Requirements ¡ The appliance is ready to run the ¡ The appliance is ready to run the appliance care programme. appliance care programme. -
Page 38: Preparing The Appliance For The Intensive Appliance Care Programme
en Appliance care a The appliance care programme Insert the condensation container starts and an audible signal so that it locks into place. sounds. a "End" appears on the display once the appliance care programme has ended and an audible signal sounds. Pull out the condensation con- tainer, keeping it level. -
Page 39: Running The Intensive Appli- Ance Care Programme
Appliance care en Pour a bottle of the original appli- Requirements ¡ The appliance is ready to run the ance care product appliance care programme. → "Accessories", Page 28 and ap- → "Preparing the appliance for the prox. 1 ½ litres of warm tap water into the condensation container. appliance care programme ", Page 35 ¡... -
Page 40: Ending The Intensive Appli- Ance Care Programme
en Appliance care Pull out the condensation con- 16.7 Ending the intensive ap- tainer horizontally and empty it. pliance care programme Add approx. 1 ½ litres of hot tap water into the condensation con- tainer. Add approx. 1 ½ litres of hot tap water into the condensation con- tainer. -
Page 41: Cleaning And Servicing
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . 17.1 Tips on cleaning and care Wipe down the... -
Page 42: Base Unit
en Cleaning and servicing Pull out the heat exchanger cover 17.2 Base unit by the handle. The base unit is the accessible area at the bottom of the appliance in which you will find the heat ex- changer. Opening the base unit Requirements ¡... -
Page 43: Moisture Sensor
Cleaning and servicing en Clean the insert under running wa- Insert the heat exchanger cover by ter and dry it off. the handle. Clean the opening with a soft, Close the lever for the heat ex- damp cloth. changer. Slide the insert in horizontally as Close the maintenance flap. -
Page 44: Condensation Container Filter
en Cleaning and servicing ance changes the duration of the 17.4 Condensation container automatic programme depending on filter the residual moisture in the laundry. During drying, fluff from the laundry Cleaning the moisture sensor gets into the condensation. The filter Over time, residue from limescale, in the condensation container pro- detergents and care products can tects the appliance from fluff. - Page 45 Cleaning and servicing en Slide in the filter as far as it will go. Insert the condensation container → Page 33.
-
Page 46: Troubleshooting
en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 47 Troubleshooting en Fault Cause and troubleshooting Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶ Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 26. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
- Page 48 en Troubleshooting Fault Cause and troubleshooting and programme Dirt in the appliance. terminated. → "Preparing the appliance for the intensive appli- ▶ ance care programme", Page 38. Condensation in the The appliance uses condensation for the automatic condensation tank self-cleaning. even though the water Not a fault –...
- Page 49 Troubleshooting en Fault Cause and troubleshooting The drying time is too → "Running the basic appliance care programme ▶ long. on the appliance", Page 37 Automatic self-cleaning function rinses the appliance's heat exchanger. Not a fault. Do not pull out the condensation tank. Do not cancel the programme.
- Page 50 en Troubleshooting Fault Cause and troubleshooting The laundry is too Set a timed programme for the subsequent drying. ▶ damp. → "Programmes", Page 26 Moisture sensor dirty. → "Cleaning the moisture sensor", Page 44. ▶ The drying process is interrupted and the condensa- tion tank has been filled. → "Emptying the condensation container", Page 32.
-
Page 51: Transportation, Storage And Disposal
Transportation, storage and disposal en Secure the water drain hose on the 19 Transportation, stor- appliance against unintentional loosening. age and disposal Ensure that you do not bend the You can find out here how to prepare water drain hose. your appliance for transportation and Empty the condensation container storage. -
Page 52: Customer Service
en Customer Service Unplug the appliance from the Detailed information on the warranty mains. period and terms of warranty in your country is available from our after- Cut through the power cord. sales service, your retailer or on our Dispose of the appliance in an en- website. - Page 53 Consumption values en 21 Consumption values algod. eco programme (de- The actual values may deviate from noted by the arrow symbol) is suit- the indicated values depending on able for drying cotton laundry with a the type of fabric, composition of normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying...
- Page 54 en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) algodón/algodão + 12,0 1400 1:47 1,19 seco algodón/algodão + 12,0 1400 1:12 0,70 seco...
-
Page 55: Technical Data
Technical data en You can find more information about your model online at https://eprel.ec.europa.eu/ . This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the charac- ters before the slash in the product number (E-Nr.) on the rating plate. - Page 56 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001724796* 9001724796 (020228)