Table of Contents
Advertisement
Linksys E2500
NOTE:
If you used the setup software for
installation, then the name of your wireless
network (up to 15 characters) is the server
name of the Router .
Host Name
The Host Name of the Router is displayed (if it
was entered on the Setup > Basic Setup screen) .
Domain Name
The Domain Name of the Router is
displayed (if it was entered on the Setup > Basic Setup
screen) .
Internet Connection
This section shows the current network information
stored in the Router . The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen .
For a DHCP connection, select Release IP Address or
Renew IP Address as appropriate to release or renew
a DHCP lease . For a PPPoE or similar connection, select
Connect or Disconnect as appropriate to connect to or
disconnect from the Internet .
Click Refresh to update the on-screen information .
Status > Local Network
The Local Network screen displays information about the
local network .
Status > Local Network
Local Network
Local MAC Address
The MAC address of the Router's
local, wired interface is displayed .
Router IP Address
The Router's IP address, as it appears
on your local network, is displayed .
Subnet Mask
The Subnet Mask of the Router is displayed .
DHCP Server
DHCP Server
The status of the Router's DHCP server
function is displayed .
Advanced Dual-Band N Router
Chapter 1: Advanced Configuration
Start IP Address
For the range of IP addresses that can
be used by devices on your local network, the starting IP
address is displayed .
End IP Address
For the range of IP addresses that can
be used by devices on your local network, the ending IP
address is displayed .
DHCP Client Table
Click this option to view a list of
computers or other devices that are using the Router as
a DHCP server .
DHCP Client Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router . The list can be sorted by IP Address, MAC
Address, Interface, and Client Name . To remove a
DHCP client, click Delete . To update the on-screen
information, click Refresh . To exit this screen and
return to the Local Network screen, click Close .
Status > Wireless Network
The Wireless Network screen displays the status information
of your 5 GHz and/or 2 .4 GHz wireless network(s) .
Status > Wireless Network
25
Advertisement
Table of Contents
