(Optional) Change the FXOS and ASA Management IP Addresses or Gateway
interface management1/1
ip address ip_address mask
Example:
ciscoasa(config)# interface management1/1
ciscoasa(config-ifc)# ip address 10.86.118.4 255.255.255.0
c) Change the network that can access ASDM.
no http 192.168.45.0 255.255.255.0 management
http ip_address mask management
Example:
ciscoasa(config)# no http 192.168.45.0 255.255.255.0 management
ciscoasa(config)# http 10.86.118.0 255.255.255.0 management
d) Save the configuration.
write memory
e) To return to the FXOS console, enter Ctrl+a, d.
Example
The following example configures an IPv4 management interface and gateway:
firepower-2110# scope fabric-interconnect a
firepower-2110 /fabric-interconnect # show
Fabric Interconnect:
ID
Prefix Operability
---- --------------- --------------- --------------- ---------------- ----------------
------ -----------
A
64
firepower-2110 /fabric-interconnect # set out-of-band static ip 192.168.2.111 netmask
255.255.255.0 gw 192.168.2.1
Warning: When committed, this change may disconnect the current CLI session
firepower-2110 /fabric-interconnect* # commit-buffer
firepower-2110 /fabric-interconnect #
The following example configures an IPv6 management interface and gateway:
firepower-2110# scope fabric-interconnect a
firepower-2110 /fabric-interconnect # scope ipv6-config
firepower-2110 /fabric-interconnect/ipv6-config # show ipv6-if
Management IPv6 Interface:
IPv6 Address
----------------------------------- ---------- ------------
2001:DB8::2
Cisco Firepower 2100 Getting Started Guide
202
OOB IP Addr
OOB Gateway
192.168.2.112
192.168.2.1
Operable
OOB Netmask
OOB IPv6 Address OOB IPv6 Gateway
255.255.255.0
2001:DB8::2
Prefix
IPv6 Gateway
64
2001:DB8::1
ASA Deployment with ASDM
2001:DB8::1