Inserting the door panels.
Read these instructions completely and carefully.
Insert the Freezer Panel and Fresh Food Panel.
Carefully push the freezer panel in until it slides
into the slot behind the door handle. Push the filler
panel (required with some door panels) in behind
the decorator panel. Repeat for fresh food panel.
Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the
slot behind the door handle. Push the filler panel
Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator
compartment.
With a T-20 Torxdriver, attach the Top Trim, using
two screws on each Top Trim piece, to the top
Top Trim Screws
Top Trim Screws
Cut-Out
Top
Freezer
Panel
Bottom
Freezer
Panel
Side Trim
If your model has a dispenser, this step only applies
to the fresh food panel and top freezer panel.
(required with some door panels) in behind the
decorator panel.
of each door. Hand tighten only. Make sure
that the top of each panel fits snugly behind
the lip of the Top Trim.
Cut-Out
Fresh
Food
Panel
Side Trim
21