Re-installing the Drawer
1.
Pull the drawer slides all the way out of the drawer
opening.
2.
Gently lower the drawer between the extended slides
until it is suspended by them.
3.
Slide the back of the drawer mounting brackets under
the drawer mounting clips on the slides.
4.
Push one side of the drawer down onto its locking tab,
until the tab locks into place.
5.
Repeat the same process on the opposite side.
6.
Gently open and close the drawer to make sure that it
is properly installed.
StEP 3: Slide mounting
bracket under clip on slide
StEP 4: Push front of
drawer down until tabs lock
into place
8
Installation Instructions
Clip on slide
Slide
Verifying the Warming Drawer
Operation
1.
Connect power plug to the electrical outlet.
2.
Operate the warming drawer as outlined in the use and
care manual that accompanied this product.
Installation Checklist
•
To ensure a safe and proper installation, the
following checklist should be completed by the
installer to ensure that no part of the installation has
been overlooked.
•
Proper installation is the responsibility of the
homeowner. The importance of proper installation of
your warming drawer cannot be overemphasized.
□
Has the mounting platform been installed according to
the instructions on page 6?
□
Has the a properly grounded, dedicated, three prong
electrical outlet been installed for the appliance by a
licensed electrician? See page 6.
□
Has the chassis been properly fastened to the
mounting platform and sides of the cabinet?
See page 7.
□
Has the drawer been properly installed?
□
Has proper operation
□
Have any problems been noted on the warranty card
or during the on-line warranty activation? Has the
warranty been activated on-line or the warranty card
filled out completely and mailed?
WARNING
been verified?