Husqvarna 143R-II Operator's Manual page 7
Hide thumbs
Also See for 143R-II:
- Operator's manual (268 pages) ,
- Operator's manual (196 pages) ,
- Operator's manual (92 pages)
Table of Contents
Advertisement
Available languages
Available languages
To do a check of the throttle trigger lockout
1. Make sure that the throttle trigger lockout (A) and
throttle trigger (B) move freely and that the return
spring operates correctly.
B
2. Push down the throttle trigger lockout and make
sure that it goes back to its initial position when you
release it.
3. Make sure that the throttle trigger is locked at the
idle position when the throttle trigger lockout is
released.
4. Start the product and apply full throttle.
5. Release the throttle trigger and make sure that the
cutting attachment stops and stays stationary.
WARNING:
attachment moves when the throttle
trigger is in the idle position, then the
carburetor idle speed must be adjusted.
1334 - 005 - 22.02.2022
A
If the cutting
Refer to
page 24 .
To do a check of the stop switch
1. Start the engine.
2. Move the stop switch to the stop position and make
sure that the engine stops.
To do a check of the cutting attachment guard
The cutting attachment guard prevents injuries and
stops objects that eject in the direction of the operator.
1. Stop the engine.
2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
To adjust the idle speed on
7
Advertisement
Chapters
Table of Contents
