Husqvarna 143R-II Operator's Manual page 10
Hide thumbs
Also See for 143R-II:
- Operator's manual (268 pages) ,
- Operator's manual (40 pages) ,
- Operator's manual (36 pages)
Table of Contents
Advertisement
Available languages
Available languages
•
Only use recommended cutting attachments.
•
The length of the trimmer line is important. For a
longer trimmer line, more engine power is necessary
than for a shorter trimmer line of the same diameter.
•
Do not move the installation position of the trimmer
guard.
•
Make sure that the cutter on the trimmer guard is
not damaged. The cutter cuts the trimmer line to the
correct length.
•
Soak the trimmer line for 2 days before use, to
increase its life length.
Grass blades and grass cutters
•
Use the product with an approved grass blade. Do
not use a grass blade without proper installation of
all required parts. Make sure that the installation is
done correctly and that the proper parts are used.
Improper installation may cause the blade to fly off
and seriously injure the operator or the bystanders.
•
Wear protective gloves when you handle or do
maintenance on the blade.
•
Use head protection when you operate a product
with a grass blade.
•
Grass blades and grass cutters are used to cut
rough grass.
•
A grass blade can cause injury while it continues
to spin after the engine is stopped or the throttle
trigger is released. Make sure that the grass
blade has completely stopped rotating before any
maintenance.
•
Stop the engine before you do work on the cutting
attachment. Make sure the cutting attachment fully
stops. Disconnect the lead from the spark plug.
•
Only use an approved cutting attachment or a
correctly sharpened blade.
•
Keep the teeth of the blade correctly sharpened.
•
Do not use a damaged cutting attachment.
•
Attach the transport guard to the grass blade when
you transport or store the product.
Blade thrust
•
A blade thrust is a sudden movement of the product
to the side, forward or rearward. A blade thrust
occurs when the grass blade hits an object that
cannot be cut. In areas where it is not easy to
see the material being cut the risk of blade thrust
increases.
10
•
When a blade thrust occurs, there is a risk that the
product or the operator moves out of position. A
blade that moves can hit bystanders and there is a
risk of injuries.
•
If a blade is bent, has cracks, is broken or damaged,
discard the blade.
•
Use a sharp blade. The risk of blade thrust increases
when a blade is not sharp.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
•
Stop the engine, make sure that the cutting
attachment stops and let the product cool down
before you do the maintenance.
•
Disconnect the spark plug cap before you do the
maintenance.
•
The exhaust fumes from the engine contain
carbon monoxide, an odorless, poisonous and very
dangerous gas that can cause death. Do not run the
product indoors or in closed spaces.
•
The exhaust fumes from the engine are hot and can
contain sparks. Do not run the product indoors or
near flammable material.
•
Accessories and changes to the product that are not
approved by the manufacturer, can cause serious
injury or death. Do not change the product. Always
use original accessories.
•
If the maintenance is not done correctly and
regularly, there is an increased risk of injury and
damage to the product.
•
Only do the maintenance as this operator's manual
recommends. Let an approved Husqvarna service
agent do all other servicing.
•
Let an approved Husqvarna service agent do
servicing on the product regularly.
•
Replace damaged, worn or broken parts.
Fuel safety
WARNING:
instructions that follow before you use the
product.
•
Do not mix the fuel indoor or near a heat source.
•
Do not start the product if there is fuel or engine oil
on the product. Remove the unwanted fuel/oil and
let the product dry. Remove unwanted fuel from the
product.
•
If you spill fuel on your clothing, change clothing
immediately.
•
Do not get fuel on your body, it can cause injury. If
you get fuel on your body, use a soap and water to
remove the fuel.
Read the warning
Read the warning
1334 - 005 - 22.02.2022
Advertisement
Chapters
Table of Contents
