Related Manuals for Honeywell CT45 Series
Summary of Contents for Honeywell CT45 Series
- Page 1 CT45/CT45 XP Series powered by Android™ Quick Start Guide CT45-A-EN-QS-01 Rev C 3/22...
-
Page 2: Memory Card Specifications
Note: CT45-L0N and CT45P-X0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional... -
Page 3: Computer Features
Computer Features Imager Window (LED/Laser Aperture) Speaker (Handset Receiver) Microphone Scan Status LED Front Camera Battery Status/ Power Button Notification LED Push-to-Talk Button Touch Panel Scan Button Scan Button Speaker Microphone... - Page 4 Note: Hand strap not shown. Camera Lens and Flash Laser Safety Label Location Volume Button Scan Button Nano-SIM and/or MicroSD Card Socket Door USB, Type C Audio Jack I/O Connector (Model Dependent)
- Page 5 Speaker Out for Bluetooth Low In Port for Energy Beacon* Bluetooth Low (CT45 XP Only) Energy Beacon* (CT45 XP Only) Microphone Barometer Sensor Battery * Part of Honeywell Device Finder solution when CT45/CT45 XP mobile computer is registered with Operational Intelligence.
- Page 6 SIM type and activation method varies by model and model configuration. Refer to the user guide for additional information on eSIM or dual nano-SIM activation and provisioning. CT45 series: CT45-L1N-xxxx2xx CT45 XP series: CT45P-L1N-xxxx2xx, CT45P-L1N-xxxxExx x = configuration variation SIM 1 SIM 2* * SIM 2 availability and type (i.e., eSIM or nano-SIM socket) are model...
-
Page 7: Install A Microsd Card (Optional)
Install a microSD Card (Optional) CT45 series: CT45-L1N-xxxx2xx CT45 XP series: CT45P-L1N-xxxx2xx, CT45P-L1N-xxxxExx x = configuration variation Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card. - Page 8 Install a microSD Card (Optional) CT45 series: CT45-L0N-xxxx0xx CT45 XP series: CT45P-X0N-xxxx0xx x = configuration variation Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
-
Page 9: About The Battery
Avant d’essayer d’utiliser, de charger ou de remplacer la batterie de l’appareil, lisez attentivement toutes les étiquettes, marquages et documentation du produit fournis dans la boîte ou en ligne à sps.honeywell.com. Pour en savoir plus sur l’Entretien de Batteries pour Appareils Portables, consultez-le honeywell.com/PSS-BatteryMaintenance. -
Page 10: Install Battery
Install Battery... -
Page 11: Install The Hand Strap
Install the Hand Strap... -
Page 12: Charge The Mobile Computer
Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the battery with a CT40/CT45 Series charging device for a minimum of 3 hours. Note: Using the computer while charging the battery increases the time required to reach a full charge. If the mobile computer is drawing more current than supplied by the charging source, charging will not take place. -
Page 13: Turn Power On/Off
About the USB Type C Connector You can use the provided USB cable to charge the mobile computer from a host device (e.g., laptop or desktop computer). The connected host device must supply a minimum power output of 5V, 0.5A to the CT45/CT45 XP or the battery will not charge. -
Page 14: Battery Replacement
Battery Replacement Before removing the battery, always do one of the following: • Power off the computer. • Place the unit in Swap Battery mode (available on CT45 XP models only). Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard. -
Page 15: Screen Timeout
Screen Timeout The screen timeout (sleep mode) automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. • Press and release the Power button to wake the computer. Adjust the Screen Timeout To adjust the amount of time before the display sleeps after inactivity:... -
Page 16: About The Home Screen
About the Home Screen Notification / Status Bar Home Screen Panel Favorites Tray Search Bar Navigation Buttons... -
Page 17: Navigation And Function Buttons
Navigation and Function Buttons For button locations, see Computer Features on page 2. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan but- ton to trigger the scanner. -
Page 18: About Provisioning Mode
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle. - Page 19 Sync Data To move files between your CT45/CT45 XP and a computer: Connect the CT45/CT45 XP to your computer using a USB charge/communication accessory. On the CT45/CT45 XP, swipe down from the top of the screen to see the notifications panel. Touch the Android System notification twice, to open the options menu.
-
Page 20: Restart The Mobile Computer
Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to honeywell.com/PSStechnicalsupport. Documentation Product documentation is available at sps.honeywell.com. -
Page 21: Limited Warranty
Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.