Siemens SIMATIC IPC477D Operating Instructions Manual page 100
Hide thumbs
Also See for SIMATIC IPC477D:
- Operating manual (54 pages) ,
- Operating instructions manual (292 pages) ,
- Quick install manual (2 pages)
Table of Contents
Advertisement
Expanding the device and assigning device parameters
6.2 Installing and removing a memory module
Procedure
Note
Note the protective measures required when working with ESD in the section "ESD guideline
(Page 133)".
Removal
1. Press the marked latches towards the
outside.
The memory module tilts forward.
2. Pull the memory module out of the slot in
the direction of the arrow.
Installation
1. Insert the memory module into the
marked slot at an incline with the contact
side toward the motherboard.
2. Carefully press the memory module into
the contact strip until the latches engage.
3. Re-install the SSD (for 12" touch built-in unit only) and connect the device.
100
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
Advertisement
Table of Contents
