Cisco Linksys WRT350N Quick Installation Manual page 167

Wireless-n gigabit router with storage link

Hide thumbs Also See for Linksys WRT350N:

User manual (93 pages)

100

Table Of Contents

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

Table of Contents

Wireless-N Gigabit Router with Storage Link

15. I can't access my e-mail, web or I am getting corrupted data from the Internet.

The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500.

For most DSL users, it is strongly recommended to use MTU 1492.

• If you are having some difficulties, perform the following steps:

1. To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the

Router.

2. Enter the password, if asked. (The default password is admin.)

3. On the Basic Setup screen, look for the MTU option, and select Manual. In the Size field, enter 1492.

4. Click the Save Settings button to continue.

• If your difficulties continue, change the Size to different values. Try this list of values, one value at a time,

in this order, until your problem is solved:

1462

1400

1362

1300

16. The Power LED keeps flashing.

The Power LED flashes when the Router is first powered up. Meantime, the Router will boot up itself and

check for proper operation. After finishing the checking procedure, the LED stays solid to show that the

Router is working fine. If the LED keeps flashing after this time, the Router is not working properly. Try to flash

the firmware by assigning a static IP address to the computer, and then upgrade the firmware. Try using the

following settings, IP Address: 192.168.1.50 and Subnet Mask: 255.255.255.0.

17. When I enter a URL or IP address, I get a time-out error or am prompted to retry.

• Check if other PCs work. If they do, ensure that your workstation's IP settings are correct (IP Address,

Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.

• If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and

powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power

connections.)

• If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is

working correctly. You can remove the Router to verify a direct connection.

• Manually configure the TCP/IP settings with a DNS address provided by your ISP.

• Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet

Explorer, click Tools, Internet Options, and then the Connection tab. Make sure that Internet Explorer is

set to Never dial a connection. For Netscape Navigator, click Edit, Preferences, Advanced, and Proxy.

Make sure that Netscape Navigator is set to Direct connection to the Internet.

Appendix A: Troubleshooting

Common Problems and Solutions

Table of Contents

Cisco Linksys WRT350N Quick Installation Manual page 167

Related Manuals for Cisco Linksys WRT350N

Related Products for Cisco Linksys WRT350N

Table of Contents