Husqvarna 525RJX Operator's Manual page 3
Hide thumbs
Also See for 525RJX:
- Operator's manual (36 pages) ,
- Operator's manual (86 pages) ,
- Workshop manual (71 pages)
Table of Contents
Advertisement
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Loop handle
7. Throttle trigger
8. Stop switch
9. Throttle lockout
10. Spark plug cap and spark plug
11. Cylinder cover
12. Starter rope handle
13. Fuel tank
14. Air filter cover
15. Air purge bulb
16. Choke control
17. Locknut
18. Support flange
19. Support cup
20. Blade
21. Drive disc
22. Locking pin
23. Operator's manual
24. Combination spanner
25. Allen key
26. Harness
27. J-handle
28. Handle adjustment
29. Transport guard
30. Suspension ring
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
The product complies with the applicable
EU directives.
This product conforms to the applicable
UK regulations.
1927 - 001 - 10.06.2022
The product can cause objects to eject,
which can cause injury.
Keep a minimum of 15 m distance to
persons and animals during operation of
the product.
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts.
The arrows show the limit for the handle
position.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Only use flexible cutting wire. Do not use
metal cutting attachments.
Air purge bulb.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 22 and on the label.
Idle adjustment screw.
High speed needle.
Low speed needle.
Technical
3
Advertisement
Table of Contents
