Operation Manual / A130-H.. - A140-H..
10
Disassembly and assembly
Installing the compressor casing
Figure 32
Always replace the O-ring (42012) (see chapter Spare parts [➙ 113]).
Thoroughly clean the fastening strips (72012) before assembly.
Attach swivel lifting eyes (a) to the compressor casing (72000) and lifting gear.
Install the compressor casing (72000).
Install the fastening strips (72012) with screws (72011).
(Table of tightening torques [➙ 103])
© Copyright 2013 ABB. All rights reserved.
HZTL2414_EN
Page 90 / 115
Revision B
March 2013