Removing Air Inlets; Fig. 32: Removing The Air Inlets - ABB Power2 550-M44 Operation Manual
Hide thumbs
Also See for Power2 550-M44:
- Operation manual (122 pages) ,
- Operation manual (122 pages) ,
- Operation manual (122 pages)
Table of Contents
Advertisement
Operation Manual / Power2 550-M / High-pressure stage
9 Disassembly and assembly / 9.5 Removing air inlets
9.5
Removing air inlets
Mark the casing position for assembly.
u
Fig. 32: Removing the air inlets
1. Loop the lifting gear around the radial air suction branch (82000).
2. Loosen hexagon-head screws (72013) and remove with washers (72014).
3. Remove the bellows (82300) together with the radial air suction branch (82000) or the
axial air suction branch (82000) with the O-ring (82010), respectively.
Measure clearance N (see
u
© Copyright 2022 ABB. All rights reserved.
Measuring radial clearances N and R
HZTL4058_EN
→91).
Rev.F
March 2022
Advertisement
Chapters
Table of Contents
