26
REMOTE CONTROL
Registering Magic Remote Control
The Magic Remote Control operates by pairing
with your TV.
Register the Magic Remote Control to use it.
How to register the Magic Remote Control
To register the remote control,
press the
the remote control while aiming it
at your TV.
How to Re-register the Magic Remote Control
after Registration Failure
Reset the remote control by
BACK
pressing and holding both the
BACK
and HOME
HOME
for 5 seconds. (Once the reset is
complete, the light on the Pointer
blinks.) Then repeat the above
procedure to register the remote
control.
How to use Magic Remote
Control
1
Press
there is no pointer on your TV
screen. The pointer will then
appear on the screen.
»
If the pointer has not been
used for a certain period of
time, it will disappear.
2
You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
»
If the pointer does not work
properly after clicking the
the remote control for 10
seconds then use it again.
(Wheel) button on
buttons
(Wheel) button if
(Wheel)
button, leave
Precautions to Take when Using
the Magic Remote Control
y
Use the remote control within the maximum
communication distance (10 m, 32.8ft).
Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
y
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as this will use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
y
The Magic Remote Control may be damaged
or may malfunction if it is dropped or
receives a heavy impact.
y
Take care not to bump into nearby furniture
or other people when using the Magic
Remote Control.
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y
It is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m (3.28 ft), the magic remote control may
not perform as expected due to frequency
interference.