hit counter script
LG 55XS2B-B.AUS Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. 55XS2B-B.AUS
  6. Owner's manual
LG 55XS2B-B.AUS Owner's Manual

LG 55XS2B-B.AUS Owner's Manual

Monitor signage
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it for future
reference.
49XF2B
49XS2B
55XF2B
55XS2B
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG 55XS2B-B.AUS

Summary of Contents for LG 55XS2B-B.AUS

  • Page 1 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 49XF2B 49XS2B 55XF2B 55XS2B www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    ASSEMBLY AND PREPARATION - Picture Settings Optional Accessories - Sound Settings - Network Settings Parts and Buttons - General Settings Portrait Layout Attaching and removing the LG Logo TROUBLESHOOTING Bracket Installing on a Wall PRODUCT SPECIFICATIONS REMOTE CONTROL IR CODES MAKING CONNECTIONS...

  • Page 3: Important Precautions

    Important Precautions • Do not insert metal or other conductive materials into the product openings. Additionally, do not touch the power cable right after plugging into the wall input terminal. Please read these safety precautions carefully before using the ► You may be electrocuted.

  • Page 4: Precautions In Installing The Product

    • If you smell smoke or other odors or hear a strange sound from the to move. product unplug the power cord and contact LG Customer Service. ► If you drop the product, the damaged product can cause electric ►...

  • Page 5: Precautions In Using/Cleaning The Product

    ► Fire or electric shock can occur. ► Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product.

  • Page 6: Licenses

    LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 7: Assembly And Preparation

    SuperSign Software and Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added.

  • Page 8: Parts And Buttons

    Parts and Buttons 55XF2B 49XF2B (Illuminance sensor / (Illuminance sensor / IR Receiver) IR Receiver) (Power Indicator) (Power Indicator) 55XS2B 49XS2B (Illuminance sensor / IR Receiver) (Power Indicator) Screen Buttons...

  • Page 9: Portrait Layout

    Illuminance sensor: Adjusts the screen brightness by measuring the amount of light. • IR Receiver: This is where the unit receives signals from the remote control. Power Indicator: This Indicator lights up red when the display operates normally (on mode). If the display •...

  • Page 10: Attaching And Removing The Lg Logo Bracket

    After removing the screw, remove the LG Logo. After removing the screw, remove the LG Logo. Align When re-attaching the LG Logo, repeat the process with the hole on the left side to attach the LG Logo in reverse order. Bracket with a screw.

  • Page 11: Installing On A Wall

    Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.
  • Page 12 Insert and tighten the eyebolts, or brackets and Securing the monitor to a wall (optional) bolts on the back of the monitor. (Only for **XS2B model) - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. Mount the wall brackets with the bolts to the wall.

  • Page 13: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover.
  • Page 14 Selects the Picture Mode. Activates the Launcher. This model does not support this. Accesses the main menus or saves your input and exit menus. SuperSign menu key (Depending upon the model, this feature may not be supported.) Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input.

  • Page 15: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided.

  • Page 16: Daisy Chain Monitors

    Daisy Chain Monitors To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. Monitor 1 Monitor 2 Monitor 3...

  • Page 17: Using The Input List

    Using the Input List HDMI1 -> HDMI2 -> DISPLAYPORT -> DVI-D ENTERTAINMENT Using My Media Connecting USB Storage Devices Connect a USB storage device such as a USB flash memory or an external hard drive to the display and use multimedia features.
  • Page 18 Tips for using USB storage devices • Only a USB storage device can be recognized. • A USB device does not work effectively when it is connected via a USB hub. • A USB storage device using an automatic recognition program may not be recognized. •...

  • Page 19: Files Supported By My Media

    Files Supported by My Media Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema To use Select Play, Photos/ Videos/ Music • Play Selection: plays back selected content. To set Device Selection, Photos/ Videos/ Music Device Selection: import contents from the selected device.
  • Page 20 Supported Internal Subtitle Format • FULL HD Video 1920 X 1080: XSUB (Supports internal subtitles generated from DivX6) Supported Video Codec Extension Codec .asf Videos VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles .wmv Audio WMA Standard (excluding WMA v1/WMA Speech), WMA 9 Professional .divx Videos DivX3.11, DivX4, DivX5, DivX6, XViD (except 3 warp-point GMC), H.264/AVC, Motion...
  • Page 21 Supported Audio File File Format Item Information .MP3 Bit rate 32 Kbps to 320 Kbps Sample freq. 16 KHz to 48 KHz Support MPEG1, MPEG2, Layer2, Layer3 .wav Support .ogg Support Vorbis .wma Support Supported Photo File File Format Format Item 2D (jpeg, jpg, JPEG...

  • Page 22: Viewing Videos

    Viewing Videos Play video files on display. All of the saved video files are shown in your display. To play video files on display Videos Tips for Playing Video Files • Some user-created subtitles may not work properly. • Some special characters in subtitles are not rendered. •...

  • Page 23: Viewing Photos

    Viewing Photos Settings The displays on the screen may differ from the You must register your product to play a DRM- protected DivX video. model. In order to register/deregister purchased or Viewing image files rented DivX contents Photos Settings DivX VOD In order to play purchased or rented DivX VOD contents, you should register your device with the 10-digit DivX registration code from your device at...

  • Page 24: Supersign Contents

    SuperSign Contents File Manager Plays stored files using the Export option in You can move, copy, or delete files. SuperSign Editor. To move, copy, or delete files To play back the stored files using the Export option • You can move or copy files or folders from Only contents distributed by SuperSign Manager internal to external memory.

  • Page 25: Picture Id Settings

    PICTURE ID Settings NOTE PICTURE ID is used to change the settings of a • If PICTURE ID is set to 2, only the upper specific set (display) using a single IR receiver for right monitor, which has a Set ID of 2, can be multi-vision.

  • Page 26: User Settings

    User Settings Main Menu Settings Quick Settings Configures frequently used settings menus. To turn your monitor on or off automatically Quick On Timer/Off Timer You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer, select Off in Repeat. To set the backlight and contrast automatically Quick Smart Energy Saving...

  • Page 27: Picture Settings

    Picture Settings To Select Picture Mode Picture Picture Mode Select the picture mode that is best suited to the video type. • Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and sharpness. Standard: adjusts the video image for a normal environment. •...
  • Page 28 To fine-tune the picture mode Picture Picture Adjust • Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. • Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is.
  • Page 29 • Picture Options: customizes the picture options. Noise Reduction: Removes irregularly generated tiny dots for a clear picture. – – MPEG Noise Reduction: Reduces the noise produced while creating digital video signals. Black Level: Adjusts the black level of the picture to correct the brightness and contrast of the picture. –...
  • Page 30 To use the Energy Saving function Picture Energy Saving Reduces power consumption by adjusting peak screen brightness. Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with • certain models.) • Off: disables the Energy Saving mode. Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for •...

  • Page 31: Sound Settings

    Speaker: adjusts the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. From the default value, the closer the value is to -, the faster the sound output becomes, and the closer the value is to +, the slower the sound output becomes.

  • Page 32: Network Settings

    Network Settings To Set a Signage Monitor Name Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Network Network Wired Connection (Ethernet) Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, •...
  • Page 33 For details, contact your ISP. • LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment.

  • Page 34: General Settings

    General Settings To configure the language General Menu Language Select one of the languages on the menu displayed on the screen. • Menu Language: sets a language for Signage. To set the time/date General Time & Date You can check or change the time. Time: you can set the time manually.
  • Page 35 To turn your monitor on or off automatically General Timers You can set the On/Off Timer for your monitor. On Timer: you can set the time when your monitor turns on. • Off Timer: you can set the time when your monitor turns off. •...

  • Page 36: Troubleshooting

    TROUBLESHOOTING No image is displayed Problem Action Is the product power cord connected? Check if the power cord is correctly plugged into the power outlet Does the “Invalid Format” message The signal from the PC (graphic card) is out of the vertical or appear? horizontal frequency range of the product.
  • Page 37 The audio function does not work. Problem Action No sound? See if the audio cable is connected properly. Adjust the volume. See if the sound is set properly. Sound is too dull. Select the appropriate equalizer sound. Sound is too low. Adjust the volume.
  • Page 38 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once every 12 hours at the very minimum;...

  • Page 39: Product Specifications

    PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. refers to alternating current (AC), and refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Video signal Maximum resolution 1920 x 1080 @ 60 Hz...
  • Page 40 55XF2B LCD screen Pixel pitch 0.210 mm (H) x 0.630 mm (V) (0.008 inches (H) x 0.024 inches (V)) Power Rated power AC 100-240 V~ 50/60 Hz 2.9 A Power consumption On Mode 230 W (Typ.) Sleep Mode (DVI-D, HDMI) ≤ 1.0 W Sleep Mode(DISPLAYPORT) ≤...
  • Page 41 49XF2B LCD screen Pixel pitch 0.1864 mm (H) x 0.5593 mm (V) (0.007 inches (H) x 0.022 inches (V)) Power Rated power AC 100-240 V~ 50/60 Hz 2.2 A Power consumption On Mode 190 W (Typ.) Sleep Mode (DVI-D, HDMI) ≤ 1.0 W Sleep Mode(DISPLAYPORT) ≤...
  • Page 42 HDMI / DVI-D / DISPLAYPORT (PC) Support Mode NOTE Horizontal Vertical Resolution frequency (kHz) frequency (Hz) • PC resolutions available for the Input Label 640 x 480 31.469 59.94 option in HDMI / DVI-D / DISPLAYPORT input modes: 640 x 480/60 Hz, 1280 x 720/60 Hz, 800 x 600 37.879 60.317...

  • Page 43: Ir Codes

    IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button Remote control button Remote control button Energy Saving Remote control button INPUT Remote control button Remote control button Number Key 0...
  • Page 44 Code (Hex) Function Remarks TILE Remote control button EXIT Remote control button ID ON (RED) Remote control button ID OFF (GREEN) Remote control button YELLOW Remote control Button BLUE Remote control button Remote control button Remote control button Remote control button Remote control button Remote control button W.BAL...

  • Page 45: To Control Multiple Products

    TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable Connect the RS-232C cable as shown in the picture.

  • Page 46: Command Reference List

    Command Reference List COMMAND DATA (Hexadecimal) Power 00 to 01 Select input See Select Input Aspect Ratio See Aspect Ratio Energy Saving See Energy Saving Picture Mode See Picture Mode Contrast 00 to 64 Brightness 00 to 64 Sharpness 00 to 32 Color 00 to 64 Tint...
  • Page 47 COMMAND DATA (Hexadecimal) White Balance Red Offset 00 to 7F White Balance Green Offset 00 to 7F White Balance Blue Offset 00 to 7F Backlight 00 to 64 Screen off 00 to 01 Tile Mode 00 to FF Check Tile Mode Tile ID See Tile ID Natural Mode...

  • Page 48: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes. * [Command2]: controls monitor sets. * [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
  • Page 49 01. Power (Command: k a) 04. Energy Saving (Command: j q) Controls the power on/off of the set. Sets the Energy Saving. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off Data 00: Off 01: On 01: Minimum Acknowledgement 02: Medium...
  • Page 50 07. Brightness (Command: k h) 10. Tint (Command: k j) Adjusts the screen brightness. Adjusts the screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Data 00 to 64: Tint red 50 to green 50 Acknowledgement Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 51 13. Sound mode (Command: d y) 17. Time 2 (hour/minute/second) (Command: f x) Selects a sound mode. Adjusts the Time 2 (hour/minute/second) value. Transmission Transmission [d][y][ ][Set ID][ ][Data][Cr] [f ][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 01: Standard Data1 00 to 17: 00 to 23 hours 02: Music Data2...
  • Page 52 20. Off Timer (Repeat/Time) (Command: f e) 21. On timer (Repeat/Time) (Command: f d) Configures Off Timer (Repeat/Time) settings. Configures On Timer (Repeat/Time) settings. Transmission Transmission [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 Data1 1.
  • Page 53 22. On Timer Input (Command: f u) 23. No Signal Power Off (15Min) (Command: f g) Select an external input for the current On Time setting and add Configures the automatic standby settings. Transmission a new schedule. Transmission [f ][g][ ][Set ID][ ][Data][Cr] [f ][u][ ][Set ID][ ][Data1][Cr] Data 00: Off...
  • Page 54 26. Reset (Command: f k) 29. Time Elapsed (Command: d l) Performs the Picture and Factory Reset functions. Checks the elapsed time. Transmission Transmission [d][l][ ][Set ID][ ][Data][Cr] [f ][k][ ][Set ID][ ][Data][Cr] Data FF: Read status Data 00: Picture Reset Acknowledgement 02: Initial Settings (factory reset) [l][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 55 32. White balance red gain (Command: j m) 35. White Balance Red Offset (Command: s x) Adjusts the white balance red gain value. Adjusts the white balance red offset value. Transmission Transmission [j][m][ ][Set ID][ ][Data][Cr] [s][x][ ][Set ID][ ][Data][Cr] Data 00 to 7F: Red Offset 0 to 127 Data...
  • Page 56 38. Backlight (Command: m g) 41. Check Tile Mode (Command: d z) Adjusts the backlight brightness. Checks the tile mode. Transmission Transmission [d][z][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr] Data FF: checks the tile mode Data 00 to 64: Backlight 0 to 100 Acknowledgement Acknowledgement [g][][set ID][][OK/NG][Data][x]...
  • Page 57 44. DPM Select (Command: f j) 47. Fail Over Input Select (Command: m j) To set the DPM (Display Power Management) function. Selects an input source for auto switch. Transmission * This command is only available when the Fail Over (auto) mode is set to Custom.
  • Page 58 49. Status check (Command: s v) 50. Speakers (Command: d v) Check the current signal of the product. Sets the speakers feature. Transmission Transmission [s][v][ ][Set ID][ ][Data][ ][FF][Cr] [d][v][ ][Set ID][ ][Data][Cr] Data 02: Checks whether there is a signal 05: Checks whether luminance sensors 1 and 2 work properly.
  • Page 59 53. Power Indicator (Command: f o) 56. Luminance Value Read (Command: m u) Sets the Power Indicator Settings. Reads luminance values. Transmission Transmission [f ][o][ ][Set ID][ ][Data][Cr] [m][u][ ][Set ID][ ][FF][Cr] Data 00: Off Acknowledgement 01: On [u][][SetID][][OK/NG][Data1][Data2][Data3][Data4] Acknowledgement [Data5][Data6][Data7][x ] [o][ ][Set ID][ ][OK/NG][Data][x] Data1...
  • Page 60 59. Easy Brightness Control Schedule (Command: s s) Sets an Easy Brightness Control schedule. Transmission [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. f1 to f6 (data reading) F1: Reads the 1st data from the Easy Brightness Control F2: Reads the 2nd data from the Easy Brightness Control F3: Reads the 3nd data from the Easy Brightness Control F4: Reads the 4th data from the Easy Brightness Control F5: Reads the 5th data from the Easy Brightness Control...
  • Page 61 SET. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing WARNING -This is a class A product. In a...
  • Page 62 USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 www.lg.com...
  • Page 63 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com .

  • Page 64: User Settings

    NOTE • The software-related contents may be changed without prior notice due to upgrade of the product functions. • Some features described in the User Guide may not be supported in certain models. USER SETTINGS Main Menu Settings Quick Settings Configures frequently used settings menus.

  • Page 65: Picture Settings

    Picture Settings To Select Picture Mode Picture Picture Mode Select the picture mode that is best suited to the video type. Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and • sharpness. • Standard: adjusts the video image for a normal environment. APS: APS (Auto power saving ) mode reduces power consumption by dimming control.
  • Page 66 To fine-tune the picture mode Picture Picture Adjust • Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. • Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is.
  • Page 67 • Picture Options: customizes the picture options. Noise Reduction: Removes irregularly generated tiny dots for a clear picture. – – MPEG Noise Reduction: Reduces the noise produced while creating digital video signals. Black Level: Adjusts the black level of the picture to correct the brightness and contrast of the picture. –...
  • Page 68 To use the Energy Saving function Picture Energy Saving Reduces power consumption by adjusting peak screen brightness. Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with • certain models.) Off: disables the Energy Saving mode. •...

  • Page 69: Sound Settings

    Speaker: adjusts the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. From the default value, the closer the value is to -, the faster the sound output becomes, and the closer the value is to +, the slower the sound output becomes.

  • Page 70: Network Settings

    Network Settings To Set a Signage Monitor Name Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Network Network Wired Connection (Ethernet) • Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, and configure the network settings.
  • Page 71 For details, contact your ISP. • LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment.
  • Page 72 Tips for Wireless Network Setting (It may not be supported depending on the model.) • Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices.

  • Page 73: General Settings

    General Settings To configure the language General Menu Language Select one of the languages on the menu displayed on the screen. • Menu Language: sets a language for Signage. To set the time/date General Time & Date You can check or change the time. •...
  • Page 74 NOTE • On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time.

  • Page 75: Entertainment

    ENTERTAINMENT Using My Media Connecting USB Storage Devices Connect a USB storage device such as a USB flash memory or an external hard drive to the display and use multimedia features. CAUTION • Do not turn off the monitor or remove a USB storage device when the My Media screen is activated. This could result in loss of files or damage to the USB storage device.
  • Page 76 • If the USB HDD does not have an external power source, the USB device may not be detected. To ensure the device is detected, connect the external power source. - Use a power adapter for an external power source. We do not provide a USB cable for an external power source.

  • Page 77: Files Supported By My Media

    Files Supported by My Media Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema To use Select Play, Photos/ Videos/ Music • Play Selection: plays back selected content. To set Device Selection, Photos/ Videos/ Music •...
  • Page 78 Supported Video Codec Extension Codec .asf Videos VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles .wmv Audio WMA Standard (excluding WMA v1/WMA Speech), WMA 9 Professional .divx Videos DivX3.11, DivX4, DivX5, DivX6, XViD (except 3 warp-point GMC), H.264/AVC, Motion .avi Jpeg, MPEG-4 Audio...

  • Page 79: Viewing Videos

    Supported Photo File File Format Format Item 2D (jpeg, jpg, JPEG Minimum : 64 x 64 jpe) Maximum: Normal Type: 15360 (W) x 8640 (H) / Progressive Type: 1920 (W) x 1440 2D (png) Minimum : 64 x 64 Maximum: 1920 (W) x 1080 (H) 2D (bmp) Minimum : 64 x 64 Maximum: 1920 (W) x 1080 (H)
  • Page 80 NOTE • Option values changed in Videos do not affect the Photos and Music and in turn are not affected by option values changed in Photos or Music. Option values changed in Photos and Music do affect each other. • •...

  • Page 81: Viewing Photos

    Viewing Photos Settings The displays on the screen may differ from the You must register your product to play a DRM- protected DivX video. model. Viewing image files In order to register/deregister purchased or rented DivX contents Photos Settings DivX VOD Listening to Music In order to play purchased or rented DivX VOD contents, you should register your device with 10...

  • Page 82: Supersign Contents

    SuperSign Contents File Manager Plays stored files using the Export option in You can move, copy, or delete files. SuperSign Editor. To move, copy, or delete files To play back the stored files using the Export option • You can move or copy files or folders from internal to external memory.

  • Page 83: Picture Id Settings

    PICTURE ID Settings NOTE • If PICTURE ID is set to 2, only the upper PICTURE ID is used to change the settings of a right monitor, which has a Set ID of 2, can be specific set (display) using a single IR receiver for controlled by IR signals.

  • Page 84: Ir Codes

    IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button Remote control button Remote control button Energy Saving Remote control button INPUT Remote control button Remote control button Number Key 0...
  • Page 85 Code (Hex) Function Remarks TILE Remote control button EXIT Remote control button ID ON (RED) Remote control button ID OFF (GREEN) Remote control button YELLOW Remote control Button BLUE Remote control button Remote control button Remote control button Remote control button Remote control button Remote control button W.BAL...

  • Page 86: To Control Multiple Products

    TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable Connect the RS-232C cable as shown in the picture.

  • Page 87: Command Reference List

    Command Reference List COMMAND DATA (Hexadecimal) Power 00 to 01 Select input See Select Input Aspect Ratio See Aspect Ratio Energy Saving See Energy Saving Picture Mode See Picture Mode Contrast 00 to 64 Brightness 00 to 64 Sharpness 00 to 32 Color 00 to 64 Tint...
  • Page 88 COMMAND DATA (Hexadecimal) White Balance Red Offset 00 to 7F White Balance Green Offset 00 to 7F White Balance Blue Offset 00 to 7F Backlight 00 to 64 Screen off 00 to 01 Tile Mode 00 to FF Check Tile Mode Tile ID See Tile ID Natural Mode...

  • Page 89: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes. * [Command2]: controls monitor sets. * [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
  • Page 90 01. Power (Command: k a) 04. Energy Saving (Command: j q) Controls the power on/off of the set. Sets the Energy Saving. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off Data 00: Off 01: On 01: Minimum Acknowledgement 02: Medium...
  • Page 91 07. Brightness (Command: k h) 10. Tint (Command: k j) Adjusts the screen brightness. Adjusts the screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Data 00 to 64: Tint red 50 to green 50 Acknowledgement Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 92 13. Sound mode (Command: d y) 17. Time 2 (hour/minute/second) (Command: f x) Selects a sound mode. Adjusts the Time 2 (hour/minute/second) value. Transmission Transmission [d][y][ ][Set ID][ ][Data][Cr] [f ][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 01: Standard Data1 00 to 17: 00 to 23 hours 02: Music Data2...
  • Page 93 20. Off Timer (Repeat/Time) (Command: f e) 21. On timer (Repeat/Time) (Command: f d) Configures Off Timer (Repeat/Time) settings. Configures On Timer (Repeat/Time) settings. Transmission Transmission [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 Data1 1.
  • Page 94 22. On Timer Input (Command: f u) 24. Auto Power Off (4 Hours) (Command: m n) Select an external input for the current On Time setting and add Configures the automatic off settings. Transmission a new schedule. Transmission [m][n][ ][Set ID][ ][Data][Cr] [f ][u][ ][Set ID][ ][Data1][Cr] Data 00: Off...
  • Page 95 27. Current temperature (Command: d n) 30. Product serial number (Command: f y) Checks the inside temperature. Checks the serial number of the product. Transmission Transmission [d][n][ ][Set ID][ ][Data][Cr] [f ][y][ ][Set ID][ ][Data][Cr] Data FF: Check product serial number Data FF: Check the status Acknowledgement...
  • Page 96 33. White Balance Green Gain (Command: j n) Adjusts the white balance green gain value. 36. White Balance Green Offset (Command: s y) Transmission Adjusts the white balance green offset value [j][n][ ][Set ID][ ][Data][Cr] Transmission [s][y][ ][Set ID][ ][Data][Cr] Data 00 to FE: Green Gain 0 to 254 Data...
  • Page 97 39. Screen Off (Command: k d) 42. Tile ID (Command: d i) Turns the screen on or off. Sets the tile ID value of the product. Transmission Transmission [d][i][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 01 to E1: Tile ID 1 to 225** Data 00: turns the screen on FF: checks the tile ID...
  • Page 98 45. Power On Delay (Command: f h) 48. IR Operation (Command: t p) Sets the schedule delay when the power turns on. (unit: Configures the IR operation settings of the product. Transmission seconds). Transmission [t][p][ ][Set ID][ ][Data][Cr] [f ][h][ ][Set ID][ ][Data][Cr] Data 00: locks off all of the keys 01: locks on all of the keys except the Power key...
  • Page 99 49. Status check (Command: s v) 50. Speakers (Command: d v) Check the current signal of the product. Sets the speakers feature. Transmission Transmission [s][v][ ][Set ID][ ][Data][ ][FF][Cr] [d][v][ ][Set ID][ ][Data][Cr] Data 02: Checks whether there is a signal Data 00: Off 05: Checks whether luminance sensors 1 and 2 work properly.
  • Page 100 53. Power Indicator (Command: f o) 56. Luminance Value Read (Command: m u) Sets the Power Indicator Settings. Reads luminance values. Transmission Transmission [f ][o][ ][Set ID][ ][Data][Cr] [m][u][ ][Set ID][ ][FF][Cr] Data 00: Off Acknowledgement 01: On [u][][SetID][][OK/NG][Data1][Data2][Data3][Data4] Acknowledgement [Data5][Data6][Data7][x] [o][ ][Set ID][ ][OK/NG][Data][x] Data1...
  • Page 101 59. Easy Brightness Control Schedule (Command: s s) Sets an Easy Brightness Control schedule. Transmission [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. f1 to f6 (data reading) F1: Reads the 1st data from the Easy Brightness Control F2: Reads the 2nd data from the Easy Brightness Control F3: Reads the 3nd data from the Easy Brightness Control F4: Reads the 4th data from the Easy Brightness Control F5: Reads the 5th data from the Easy Brightness Control...
  • Page 103 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 www.lg.com...
  • Page 104 CONTENTS ACCESSING INSTALLATION MENU ..3 INSTALLATION MENU ......4 - Signage Setup ..............4 - USB Cloning ..............8 - Password Change ............8 - Tile Mode ................. 9 - Fail Over ................11 - ISM Method ..............12 - Server ................14 - Lock Mode ..............14...

  • Page 105: Accessing Installation Menu

    ACCESSING INSTALLATION MENU Press and hold the SETTINGS button for 5 seconds. MUTE MENU AUTO S.MENU When Toast (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 When the Installation Menu is displayed, select the desired option. - Signage Setup - USB Cloning - Password Change...

  • Page 106: Installation Menu

    INSTALLATION MENU NOTE Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status You can select the operating status of the monitor when the main power is switched on. You can select from among PWR, STD, and LST.
  • Page 107 Auto Power Off You can choose whether to use the 4 Hours Off feature. You can set this option to 4 Hours or Off. If you set this option to 4 Hours, the product turns off when you have not pressed any buttons on the remote control for 4 hours.
  • Page 108 Power On Delay (0 ~ 250) This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultane- ously. You can set the delay interval in the range of 0 to 250 seconds. Digital Audio Input HDMI/DISPLAYPORT: you can hear the sounds of digital signals carried by HDMI, or DISPLAYPORT through the monitor speakers.
  • Page 109 BLU Maintenance Mode Enables or disables the luminance maintenance function. If turned On, the luminance maintenance function is enabled. (XF2B, XF3C: Luminance 2500 nit) If turned Off, the luminance maintenance function is disabled. (XF2B: Luminance 2500 nit, XF3C: Luminance 3000 nit) Power Indicator This feature allows you to configure the power indicator settings.

  • Page 110: Usb Cloning

    USB Cloning You can copy the product settings to other sets. Send to USB You can save the current settings in file format to a USB device. Select the file name and press the OK button to complete You cannot save the following items: Advanced Control under PICTURE, Clock, Sleep Time, Power on Delay, Set ID, Tile ID, and items under NETWORK.

  • Page 111: Tile Mode

    Tile Mode You can configure the integrated screen in the same way as each screen is configured. To use this function - Must be used with multiple monitors. - Must be operated after connecting the monitors using DP Cable and distributor. - Tile mode: row x column (r = 1 to 15, c = 1 to 15) - 15 x 15 available Row (1-15)
  • Page 112 Tile Mode Tile Mode - Natural mode This monitor can be tiled with additional monitors to When active, the part of the image that would create a large tiled display. normally be displayed in the gap between the monitors is omitted. When using 2 monitors Before When the Tile Mode...

  • Page 113: Fail Over

    Fail Over The input source with the highest priority will be selected. The Auto-Fail Over feature is disabled. Auto The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected. Priority: 1.HDMI1, 2.HDMI2, 3.DISPLAYPORT, 4.

  • Page 114: Ism Method

    ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode Selects the desired ISM Method mode. Normal : Disables the ISM method. Inversion: Inverts screen colors to remove image sticking.
  • Page 115 Bar Color You can choose from six colors: red, green, blue, white, black, and gray. This feature is only applicable when Bar Image is set to Off. This option is available only when you have selected Washing Bar. Transparency Off: Displays the bar opaquely. On: Displays the bar translucently.

  • Page 116: Server

    Server Set Automatically The monitor set will be set automatically so that the SuperSign server can search it. Server IP This is a menu where you can set an IP address for the SuperSign server. Server Status Server Status displays the status of the connection between your monitor and the SuperSign server. Not connected: indicates that your monitor is not connected to the SuperSign server.

This manual is also suitable for:

49xs2b55xf2b55xs2b49xf2b55xf2b-b.aus49xf2b-b.aus ... Show all

Table of Contents