Table of Contents
Advertisement
32
WATCHING TV
Acquired certification SO :
y
Sweden(Comhem, Canal Dig-
ital), Denmark(YouSee, Canal Dig-
ital, Stofa), Norway(Canal Digital),
Netherlands(Ziggo, UPC Digitaal),
Ukraine(Volia-Cable), Germany(KDG),
Switzerland(CableCom, UPC),
Austria(UPC Digital), Hungary(UPC Dig-
ital), Ireland(UPC Digital), Poland(UPC
Digital), Romania(UPC Digital),
Russia(OnLime).
If there are not any Service Operator
y
that you want, select Other Operators.
If you select "Other Operators", or
y
the selected country supports "Other
Operators" only, it may take some time
to search all the channels, or it may not
search some of the channels.
The following values are needed in order to
search all available programmes quickly and
correctly.
The commonly used values are provided as
"default".
However, for correct settings, please inquire
of the cable service provider.
When running Auto Tuning in DVB cable
mode, selecting Full will search through all
frequencies to find available channels.
In the case when the programme is not
searched by selecting the Default, perform the
searching by selecting the Full.
However, in the case when the programme is
searched by selecting the Full, the Auto Tun-
ing time can be taken too much.
• Frequency : Enter a user-defined fre-
quency.
• Symbol rate : Enter a user-defined symbol
rate (Symbol rate: Speed at which a
device such as modem sends symbols to
a channel).
• Modulation : Enter a user-defined modula-
tion. (Modulation: Loading of audio or
video signals onto carrier).
• Network ID : Unique identifier allocated for
each user.
• Start Frequency : Enter a user-defined
start frequency range.
• End Frequency : Enter a user-defined end
frequency range.
Selecting Satellite,
(Only Satellite models)
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
SETUP and press OK.
4
Press the Navigation buttons to scroll to
Auto Tuning and press OK.
5
Press the Navigation buttons to scroll to
Satellite and press OK.
6
Press the Navigation buttons to scroll make
appropriate adjustments and press OK.
7
Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
8
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Programme Type : You can select All
y
Programmes, FTA Programme or Paid
Programme.
Network Search : You can search through
y
both an existing Transponder List and the
Transponder List that was transmitted via
NIT.
You can change the Setting ID Info from the
y
Setting menu.
You can Add/Delete the Setting ID from the
y
SETUP -> Satellite DTV Setting menu.
If more than 6000 programmes are stored,
y
you cannot store any more programmes. To
add programmes, delete the unused setting
IDs in SETUP -> Satellite DTV Setting and
tune the TV again.
Hide quick links:
Advertisement
Table of Contents
