Table of Contents
Advertisement
machine and press Start/Pause/
Cancel key again. Programme will
resume running.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the water
softener cleaned, and then it will
resume running in drying mode.
Child (Key) Lock
You may prevent other people
from interrupting and changing the
programme cycle and time delay while
the machine is running.
To activate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3
seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
activated.
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child Lock does not lock the door
of the machine.
C
If you turn your machine off by
using On/Off key at the end of the
programme, the Child Lock will be
deactivated automatically.
C
For energy saving, the product is
automatically turned off following
the completion of the programme
or if the programme is not started.
To deactivate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3
seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
cancelled.
Cancelling the programme
1. Press Start/Pause/Cancel key for 3
seconds to cancel the programme.
2. Release the key when the Start
/ Pause indicator starts flashing.
For a couple of minutes the
machine will fulfill the necessary
operations required to cancel the
programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Salt indicator ( )
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt warning indicator
appears on the display of your
machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Rinse Aid indicator ( )
Please check the rinse aid indicator
on the display to see whether there
is adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid warning indicator
appears on the display of your
machine.
End of programme
End of Programme indicator will light
up once the washing programme is
over.
1. Press the On/Off button to turn
off your machine.
2. Close the tap.
29 EN
Advertisement
Table of Contents
