Table of Contents
Advertisement
5.2.2
5.2.2
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
5.2.2
5.2.2
5.2.2
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using
the V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n command.
V i e w / A d d C o n f i g u r a t i o n
Adding a new RAID configuration
Adding a new RAID configuration
Adding a new RAID configuration
Adding a new RAID configuration
Adding a new RAID configuration
To add a new RAID configuration:
1.
From the Management Menu, highlight C o n f i g u r e
2.
Use the arrow keys to select V i e w / A d d C o n f i g u r a t i o n
<Enter>.
3.
The ARRAY SELECTION MENU
ARRAY SELECTION MENU
ARRAY SELECTION MENU
ARRAY SELECTION MENU displays the available drives connected
ARRAY SELECTION MENU
to the SATA ports. Select the drive(s) you want to include in the RAID
set, then press <SpaceBar>. When selected, the drive indicator changes
from R E A D Y
R E A D Y to ONLIN A[X]-[Y]
R E A D Y
R E A D Y
R E A D Y
the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.
A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3
A S U S T S 1 0 0 - E 3
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n, then press
V i e w / A d d C o n f i g u r a t i o n
V i e w / A d d C o n f i g u r a t i o n
ONLIN A[X]-[Y], where X is the array number, and Y is
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
C o n f i g u r e
C o n f i g u r e
C o n f i g u r e, then press <Enter>.
C o n f i g u r e
5 - 1 1
5 - 1 1
5 - 1 1
5 - 1 1
5 - 1 1
Advertisement
Table of Contents
