Table of Contents
Advertisement
Figure 8. Remove the solid-state drive
Step 3.
Remove the solid-state drive mylar.
Figure 9. Remove the solid-state drive mylar
Go to
https://support.lenovo.com/partslookup
replacement parts:
Solid-state drive
Solid-state drive mylar
Remove the side I/O bracket
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Remove one screw and remove the side
I/O bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
32
ThinkBook Plus Gen 3 Hardware Maintenance Manual
to look up the Lenovo part numbers of the following
Advertisement
Table of Contents
