Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-H.. - A140-H
2 Removing and Installing / 2.3 Installing the turbocharger
2.3.2
Fitting threaded rods
Fig. 10: Inserting the threaded rods
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
Requirements for the threaded rods
Fig. 11: Requirements for threaded rods
Product
Diameter
Threaded rod
A130
Ø 16 / M16
A135
Ø 20 / M20
A140
Ø 24 / M24
Table 3: Requirements for threaded rods
Fastening material, scope of delivery
The threaded rods and nuts for fastening the turbocharger on the bracket are not included
in the ABB Turbo Systems scope of delivery.
The clamping nuts are included in the ABB Turbo Systems scope of delivery.
© Copyright 2017 ABB. All rights reserved.
Material
DIN / ISO 898
(Part 1)
[mm]
10.9 / 12.9
10.9 / 12.9
10.9 / 12.9
HZTL4030_EN
Thread
Length of threaded rod
length
L2 [mm]
L1 [mm]
≥ 30
≥ 30
≥ 70
410 ... 420
Revision D
250
325
May 2017
Advertisement
Chapters
Table of Contents
