Cisco CISCO1750 Installation Manual page 74

Router hardware

Table of Contents

Installing a Mini-Flash Module

Figure 5

Notched edge

Follow these steps to install a mini-Flash memory module on the motherboard:

You need to remove the motherboard from the chassis to remove the

Note

mini-Flash memory module.

Step 1

Locate the module slot on the motherboard, shown in Figure 2.

Hold the module with the notched edge away from you.

Step 2

Insert the module into the module slot at a 45-degree angle, as shown in Figure 5.

Step 3

Press down firmly on the module until you hear a clicking sound and the module

Step 4

is firmly seated in the slot.

Turn the motherboard back to its original position (right-side up) and place it in

Step 5

the chassis as before.

Cisco 1750 Router Hardware Installation Guide

viii

Installing a Mini-Flash Module

Mini-Flash module slot

45 degrees

78-6169-02

Table of Contents

Troubleshooting

1750