Grp Pcmcia Card Slots And Status Leds - Cisco 12416 Installation And Configuration Manual
Cisco systems bridge/router installation and configuration guide
Hide thumbs
Also See for Cisco 12416:
- Replacement instructions manual (32 pages) ,
- Unpacking instructions manual (28 pages) ,
- Instructions manual (16 pages)
Table of Contents
Advertisement
Chapter 1
Product Overview
Figure 1-13 Gigabit Route Processor Front Panel
1
1
PCMCIA flash card slots, eject buttons, and
slot LEDs
2
Reset button
3
Auxiliary serial port
4
Console serial port
GRP PCMCIA Card Slots and Status LEDs
Caution
OL-11495-01
2
3
Two PCMCIA card slots (slot 0 and slot 1) provide the GRP with additional flash
memory capacity or other input/output (I/O) device capability.
The GRP only supports +5.2 VDC Type I and Type II devices. It does not support
+3.3 VDC PCMCIA devices.
Status LEDs (Slot-0/Slot-1) indicate when the flash memory card or I/O device in
that slot is accessed. Each slot has an eject button to remove the card from the slot
(Figure
1-14).
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Alarm Card, Line Card, and Rout Processor Overview
4
5
5
RJ-45 Ethernet port and data status LEDs
6
MII Ethernet connection
7
Alphanumeric message displays
GIGABIT ROUTE PROCESSOR
6
7
1-25
Advertisement
Table of Contents
Troubleshooting
