Table of Contents
Advertisement
Cleaning or Replacing the Chassis Air Filter
Visually check the condition of the air filter to determine whether to clean it or
Step 3
install a new replacement filter:
•
Do not vacuum the air filter while it is installed in the chassis. Before you clean
Caution
it, you must remove the air filter completely to prevent contaminants from being
drawn into the router.
•
Slide the new or cleaned air filter into the air filter door (honey comb side down).
Step 4
Close the air filter door and tighten the captive screws (see
Step 5
Align and seat the door carefully to avoid damaging the EMI-preventive gaskets
Caution
on the door. The air filter door must be closed and secured at all times to maintain
correct EMI performance.
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
5-8
Dirty—You can either vacuum or replace the filter.
Worn or torn—If the filter appears worn or torn, dispose of it in a responsible
manner and install a new replacement (12000/10-FILTER=).
Chapter 5
Maintaining the Router
Figure
5-3).
OL-17441-01
Advertisement
Table of Contents
Troubleshooting
