Table of Contents
Advertisement
Chapter 2
Preparing for Installation
Site Requirement Guidelines
Telco Rack
Figure
2-2c shows a telco-type rack. The telco-type rack is an open frame
consisting of two posts tied together by a cross-bar at the top and a floor stand at
the bottom.
This type of rack is usually secured to the floor and sometimes to an overhead
structure or wall for additional stability. The router chassis can be installed in the
telco-type rack either in a front-mounted position or a center-mounted position.
In the front-mounted position, you secure the chassis rack-mounting brackets
directly to the rack posts
(Figure
2-3).
Figure 2-3
Front-Mounted Router—Telco Rack
Rack
Front panel
of chassis
Rack-mount bracket
(attached to rack posts)
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
2-8
OL-17441-01
Advertisement
Table of Contents
Troubleshooting
