Table of Contents
Advertisement
Chapter 3
Installing the Cisco XR 12410 Router
Step 2
Figure 3-8
Removing a Line Card from the Line Card and RP Card Cage
a
a
Loosen
Loosen
captive
captive
screws
screws
b
b
Pivot ejector
Pivot ejector
levers away
levers away
from card to
from card to
unseat card
unseat card
c
c
Grasp card carrier to
Grasp card carrier to
slide card out of slot
slide card out of slot
Step 3
OL-17441-01
Starting at slot 0:
Loosen the captive screws at the top and bottom of the front panel
a.
(Figure
3-8a).
Pivot the ejector levers to unseat the card from the backplane connector
b.
(Figure
3-8b.)
Slide the card out of the slot
c.
antistatic bag or other ESD-preventive container.
ALARM A
Repeat Step 2 for each line card.
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
(Figure
3-8c) and place it directly into an
MBUS
CSC
SFC
A
ALARM A
B
FAIL
ALARM B
ENABLE
A
B
0
1
0
1
2
3
4
ALARM B
Removing Cards from the Chassis
3-13
Advertisement
Table of Contents
Troubleshooting
