Attach The Rack-Mount Brackets-Chassis Rear-Mounted - Cisco ASR 1004 Quick Start Manual

Cisco systems router user manual

Hide thumbs Also See for ASR 1004:

Table of Contents

To install the Cisco ASR 1004 Router in an equipment rack, see

Step 6

"Two-Post Rack Installation" section on page

Note

If you install cable management brackets, make certain that the chassis is mounted in the equipment rack first.

Attach the Rack-Mount Brackets—Chassis Rear-Mounted

To install the rack-mount on a Cisco ASR 1004 Router for a rear rack-mount configuration, follow these steps:

Step 1

Locate the threaded holes in the rear sides of the chassis. Make certain that you hold the rear rack-mount bracket with

the ear facing outward and towards the rear of the chassis. Align the rack-mount bracket to the side of the router.

Position the rear rack-mount bracket top hole with the chassis second top hole in from the back (See

Step 2

Figure 2

Attaching the Rear Rack-Mount Brackets to Cisco ASR 1004 Router

Rear rack-mount bracket ear and holes

Rear rack-mount bracket (first bracket to attach to

chassis)

Insert and tighten the screws. After the bracket is secured to the side of the chassis, slide the two remaining components

Step 3

into the side rack-mount bracket.

Repeat Step 1 through Step 3 on the other side of the chassis. Use the screws on each side to secure the rear rack-mount

Step 4

brackets to the chassis.

This completes the procedure for attaching rear rack-mount brackets to the chassis. Continue on to installing the chassis in a

rack.

"Four-Post Rack Installation" section on page 6

Rear rack-mount bracket components that slide into rear

bracket which is attached to the chassis

Rear rack-mount bracket screws

Figure

2).

Table of Contents

Show Quick Links

Table of Contents